2/35997 - НАКЛАДКА НА БАМПЕР PEUGEOT 308 II SW 13-17, 2017- купити на Avtoex з Польщі в Україні - Львів, Одеса, Запоріжжя, Тернопіль, Харків, Дніпро, Вінниця, Суми, Миколаїв, Чернівці, Маріуполь.

Докладніше
Стан	Новий
Номер за каталогом	2/35997

BUMPER COVER WITH a BEND PEUGEOT 308 II SW (ESTATE) год: 2013-2017, FL2017 - & gt;
модель: 2/35997

Producer: Avisa

The avisa Rear bumper protector is the perfect solution for your car, because it has both a protective function and looks great as a decorative item. Установленная полоса устойчива к погодным условиям (температура -40 ° C / + 50 ° C) и посещает автомойку (влажность).

The standard in the strip is also the protection of the bumper edge through a specially profiled bend for this purpose.

All photos of the overlay presented at the auction are real photos, were made on the car for which the overlay was designed.

The cover is made of полированной нержавеющей стали. Это была двусторонняя, очень сильная клейкая лента.

The covers are perfectly matched to a specific car model. устойчивость к разной погоде и дорожным условиям-влаге, песку, соли. Они являются оригинальными и элегантными дополнениями к любой машине.

Application and features of the rear bumper protective cover: <улей>

paint protection against mechanical damage and царапин resulting from loading / unloading luggage,

protection against weather conditions,

gives the car an exclusive character,

очень легко собрать. < / div >

The overlay is attached with double-sided tape, which is located on all four edges of the slat. Attention!

Attach the product carefully, as it will not be possible to improve the assembly once it has attached.

After installing the cover, you can load and remove your luggage with confidence, and the scratched item is now covered with an exclusive accessory.

You will receive the overlay in a sturdy package with step-by-step assembly instructions and a 3M обсаливая wipe. Мы также прикрепляем трубку Autosol (5 мл) к заказу - полировке и реставрации нержавеющей стали. The excellent formula of the preparation provides the steel surface with a lasting gloss without scratching and a solid protective layer.

Installation instructions:

Clean and degrease the surface with the 3M wipe provided
Распаковки the overlay and read the attached manual
Without removing the tape securing, try on and carefully mark the place of gluing in order to properly adjust it to the избранный place of installation
Peel off The foil securing the double-sided tape
применить полосу к previously marked place, starting from the top edge
Press The strip down carefully over the entire surface
Ready