The overlay is attached with double-sided tape, which is located on all four edges of the slat. Attention!

Attach the product carefully, as it will not be possible to improve the assembly once it has attached.

After installing the cover, you can load and remove your luggage with confidence, and the scratched item is now covered with an exclusive accessory.

You will receive the overlay in a sturdy package with step-by-step assembly instructions and a 3M обсаливая wipe. Мы также прикрепляем трубку Autosol (5 мл) к заказу - полировке и реставрации нержавеющей стали. The excellent formula of the preparation provides the steel surface with a lasting gloss without scratching and a solid protective layer.

1. Clean and degrease the surface with the 3M wipe provided
2. Распаковки the overlay and read the attached manual
3. Without removing the tape securing, try on and carefully mark the place of gluing in order to properly adjust it to the избранный place of installation
4. Peel off The foil securing the double-sided tape
5. применить полосу к previously marked place, starting from the top edge
6. Press The strip down carefully over the entire surface
7. Ready

the action of the adhesive tape is immediate. The optimum temperature for sticking is 10 ° C-30 ° C

* the manual uses an overlay from a different Product series