1200111-01 - Конвертер 24V (18-35v) в 13.8 V 20A шаг вниз
The store will not work correctly in the case when cookies are disabled.
1200111-01 - Конвертер 24V (18-35v) в 13.8 V 20A шаг вниз
Основні параметри
Докладніше
Стан |
Новий |
Номер за каталогом |
1200111-01 |
Номери замінних деталей |
1200111-01, B20-24-13R8, |
Оригінальний номер деталі |
B20-24-13R8, 1200111-01, |
Опис
Reliable step down converter from 24V to 13.8 V 20A 276W
<улей>
input voltage range for correct and stable operation is 18-35v , energy efficiency 95%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
высококачественные медные соединительные кабели
- модель : B20-24-13r8
- Converter type : DC / DC
- Voltage change : Step down
- типичное входное напряжение [V] : 24
- минимальное входное напряжение [V] : 18
- Maximum input voltage [V] : 35
- Output voltage [V] : 13.8
- Ripple of the output voltage [MV pp] : 120
- Accuracy of the output voltage [%] : 1.5
- Maximum output current [a] : 20
- рекомендуемый минимум текущего потребления [a] : 0.5
- максимальная мощность нагрузки [Вт] : 276
- рекомендуемая минимальная мощность нагрузки [Вт] : 6.9
- Maximum energy efficiency [%] : 95
- Idle current max. [a]: 0.1
- line regulation [%] : 0.2
- load regulation [%] : 0.2
- температура coefficient [% / ° C] : 0.03
- Минимальная рабочая температура [° C] : -20
- максимальная рабочая температура [° C] : 60
- рабочая частота [кГц] : 100
- Overload / short-circuit protection for output : Overload shutdown of the инвертор
- Thermal protection : Ограниченный the output current after exceeding the max. operating temperature until it cools down
- Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
- Protection when the voltage exceeds max.Inputs : Output circuit protection
- Connection : Integrated cables
- Длина кабеля [мм] < /B> : 165
- класс Tightness : IP68
- Length [mm] : 74
- Width [mm] : 74
- Thickness [mm] : 31
- Distance between the mounting holes [mm] < /B> : 65.1
- монтажные отверстия diameter : 5.3
- Housing construction : Die-cast aluminum, cross-ribbed
- Sealing : epoxy resin
- Cooling : Passive / the case acts as a heat sink
- Weight [g] : 280
- Primary and secondary Side insulation: No-common ground