1.30.70.005 - ЦИЛИНДР, ГИДРАВЛИЧЕСКИЙ ЦИЛИНДР ХОД 1-БОКОВОЙ ХОД 630

1.30.70.005 - ЦИЛИНДР, ГИДРАВЛИЧЕСКИЙ ЦИЛИНДР ХОД 1-БОКОВОЙ ХОД 630

Що Ви шукаєте?

1.30.70.005 - ЦИЛИНДР, ГИДРАВЛИЧЕСКИЙ ЦИЛИНДР ХОД 1-БОКОВОЙ ХОД 630

В наявності
Код товару:
11345189787
5613,00 грн
Основні параметри
Докладніше
Стан Новий
Номер за каталогом 1.30.70.005
Опис

SINGLE ACTING ACTUATOR

COMPLETE WITH SINGLE BEARING EARS

Production:

Original Hydrolider product, manufacturer's символ: 1.30.70.005; CN 40/630 U25

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

Main application: boom lifting in the TUR 1, 2, 3 loader.

привод адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, auras, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.

< / div >

дорогой клиент, PLEASE READ THIS BEFORE CHOOSING YOUR Actuator SUPPLIER:

What you can see in the photo are only the metal parts of the actuator. In fact, an actuator is only as good as the internal seals used in its construction. Мы уверены, что у всех наших цилиндров есть усиленные уплотнения, которые не производятся в Китае и других дальних восточных странах. If you care about quality and durability, choose Hydrolider actuators, which are the only ones that guarantee надежность for years .

General information:

<улей>
  • Head attachment on the tube side: welded
  • Fixing the head on the rod side: screw-on
  • Гланде (closing cap) type: нитку, screwed into the pipe
  • Rod type (piston rod): хромированный, weldable
  • Dimensions:

    <улей>
  • поршень (трубка) внешний диаметр: 60 мм
  • диаметр поршневого стержня (rod): 40 мм
  • Diameter of the bolt holes: 25mm
  • Stroke (working movement) of the piston rod: 630 мм
  • the length at rest measured in the axes of the holes: 870mm
  • Internal thread for connection: M16x1.5
  • Work parameters:

    <улей>
  • максимальное разрешаемое рабочее давление: 240 бар
  • Permissible ambient temperature: -40 C до +60 C
  • Permissible Oil temperature: -15 C до +80 C
  • тип жидкости: минеральное масло на основе гидравлического масла
  • Table showing the change of the thrust force of the offered цилиндр depending on the oil pressure change in the hydraulic system (рис. ):