3-SECTION HYDRAULIC DISTRIBUTOR 40L / min
WITH ALTERNATIVE CONTROL
COMPLETED WITH 2M CABLE AND LEVER BODY
Production:
дистрибьютор: Badestnost, символ: 1.10.34.030
Links: Hydrolider символ: 1.20.00.013.1
Bodies with lever: Indemar , reference number: 1.15.00.020
улей>
Application:
The set is adapted to various types of machines, such as: agricultural, orchard, forestry, construction, industrial machines, tractors, sprayers, rounds, циклоп, HDS loaders, loaders, excavators, sweepers and other hydraulically controlled devices.
это используется для обеспечения безопасности, лучшего контроля комфорта и необходимости очистки, это необходимо установить распределитель вне кабины. Only the control unit (in this case cables and bodies with a lever) remains in the cabin.
Levers located directly at the manifold provide alternative control of the hydraulic system. Это решение дает контроль над тем же распределителем из двух разных мест на машине.
HYDRAULIC DISTRIBUTOR
технические данные:
Recommended Oil flow in the system: 0-40 л / мин
максимальное входное давление: 250 бар
максимальное давление возврата: 50 бар
Maximum pressure in sections: 300 bar
overflow valve is factory set - 180 bar ± 30 bar. Это рекомендовано, чтобы давление было проверено и отрегулировано перед комиссией. Self-adjusting, full rotation 30 Bar change.Ли>
Possibility of independent regulation, full turn of the valve is changed by 30 bar
улей>
Connection:
Internal threads in the body: Power supply: 1/2"; return: 1/2"; sections: 3/8 "
Internal thread of the tube for the rope: M16x1.5
Internal thread at the end of the slider: M6x1.5
улей>
Oil type and temperature:
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 C
rarer high-quality oil: Lotus AGROL BOXOL 26
a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46


Control and principle of operation:
Exemplary control: one-sided or double-sided cylinders as well as hydraulic motors in both directions.Ли>
3-позиционные ползунки (1 - 0 - 2), on a spring, i. e. they return to the neutral position by themselves when you release the lever.Ли>
In the neutral position, the oil flows freely into the return line, the pump is unloaded.Ли>
Possibility of serial connection to the existing system (pressure sleeve required).Ли>
BODY WITH LEVER AND ROPES
Technical data:
Материал корпуса: plastic
материал brackets fixing to the base: galvanized steel
Distributor Slide control: in both directions
возможность подключения в серии с другими, теми же телами
общая толщина тела: 49 мм
Control lines length: 2000 мм
External thread of the cords ' armor end: M16x1. 5
External thread of the end of the cable tie: M6x1