2-SECTION HYDRAULIC DISTRIBUTOR P40
WITH ONE SECTION
Production:
Original Badestnost product, manufacturer's символ: 02P40 A1C1 GKZ1; символ: 1.10.00.022
Application:
it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.
распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.
The plunger section is specially adapted to control single-acting cylinders.
a metal plug is screwed into the second hole in the section. Нет необходимости делать дополнительную передачу здесь. Односторонний цилиндр падает свободно и не блокирует масляный поток, выходящий из насоса в это время.
The plunger section is very useful in TUR front loaders with single-acting cylinders for lifting the main frame.
технические данные:
Recommended Oil flow in the system: 0-40 л / мин. Exemplary control: one single-acting actuator and one double-acting actuator.
Possibility of serial connection to the existing system (pressure sleeve required).
Control
Both three-position levers (1 - 0 - 2) на весну, и они возвращаются к вертикальным темам:
<улей>
Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.Ли>
Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.Ли>
Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.Ли>
улей>
On the right, a hydraulic diagram of the offered manifold:
Connection:
<улей>
Pump feed( P1, P2): BSP 1/2 " Female thread
Return to the tank (T1, T2): BSP 1/2 " Female thread
Sections (A2, B1, B2): BSP 3/8 " internal thread
Series connection (N): BSP 1/2 " Female thread
улей>
диапазон давления:
<улей>
Maximum pressure on the supply: 250bar
Maximum pressure on the return: 50Bar
Maximum pressure on sections: 300bar
улей>
overflow valve is factory set at 180bar ± 30 Bar.
It is recommended to check and set the correct pressure before start-up.
Possibility of independent regulation, full turn change by 30Bar.
Oil types recommended by AGRICOLA:
<улей>
rarer high-quality oil: Lotus AGROL BOXOL 26
a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
улей>
рекомендуемый диапазон температуры масла:
<улей>
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 C