P40 HYDRAULIC 1-SECTION DISTRIBUTOR
WITH a LATCH FOR motor CONTROL
Production:
Original Badestnost product, manufacturer's symbols: P40 D8 GKZ1; 1.10.00.016
Application:
it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.
The distributor is adapted to various types of machines, such as: agricultural machinery, hoes, tedders, mowers, construction machines, sweepers, mixers, industrial machines and other hydraulically controlled devices in which one section controls a hydraulic motor.
Спасибо за рычаг с фиксатором, распределитель идеально подходит для управления гидравлическим двигателем. Вы можете запустить двигатель и уйти от манифолда без необходимости держать рычаг.
технические данные:
the special design of the slider reduces Machine дергается при переключении движка на и выключается. The engine starts and brakes gradually without load. Благодаря этому дизайну, секция latch идеально подходит для управления двигателем, но не для управления гидравлическим цилиндром.
Recommended Oil flow in the system: 0-40L / min. Example of control: hydraulic motor in both directions.
Possibility of serial connection to the existing system (pressure sleeve required).
Control
Three-position lever (1 - 0 - 2), with a latch.e. it holds the position by itself in the working position:
Neutral 0 position (lever in vertical position) the engine is stationary - масло идет к переполнению.
Working position 1 (lever in the inclined position to the front), the engine turns to the left.
Working position 2 (lever in oblique position to the rear) the engine turns clockwise.
On the right, hydraulic diagrams of distributors, подряд from the left: to control the actuator and to control the engine:
Connection:
Pump feed( P): BSP 1/2 " internal thread
Return to tank( T): BSP 1/2 " Female thread
выход в разделы (A, B): BSP 3/8 " Female thread
Series connection (N): BSP 1/2 " Female thread
улей>
диапазон давления:
Maximum pressure on the supply: 250bar
Maximum pressure on the return: 50Bar
Maximum pressure on sections: 300bar
улей>
overflow valve is factory set at 180bar ± 30 Bar.
It is recommended to check and set the correct pressure before start-up. Possibility of independent regulation, Full turn change by 30Bar.
Oil types recommended by AGRICOLA:
rarer high-quality oil: Lotus AGROL BOXOL 26
a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
улей>
рекомендуемый диапазон температуры масла:
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 C