P40 HYDRAULIC 1-SECTION DISTRIBUTOR
WITH a FLOATING SECTION
Production:
Original product of the Badestnost Болгария brand, manufacturer's символ: P40 K16 GKZ1; символ: 1.10.00.013
Application:
it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.
распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.
Section floating, otherwise free рафтинг, used, m.in. для снегоходов или в турпоходах. Это означает свободное движение поршневого стержня в гидравлических цилиндрах. Это защищает от повреждений элементов, которые находятся в прямом контакте с землей, e. g. ploughshare.
технические данные:
Recommended Oil flow in the system: 0-40 л / мин. Example of control: one 2-way actuator.
Possibility of serial connection to the existing system (pressure sleeve required).
Control
Four-position lever (1 - 0 - 2 - 3), three positions (1 - 0 - 2) on the spring (the lever returns to the vertical by itself), position (3) floating on the latch (the lever stops in the floating position):
<улей>
Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.Ли>
Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.Ли>
Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.Ли>
Position 3, floating with a latch (lever in The forward position), the actuator piston rod is loose, extends and retracts freely under the influence of acting forces.Ли>
улей>
On the right, the hydraulic diagram of the distributor:
Connection:
<улей>
Pump feed( P): BSP 1/2 " internal thread
Return to tank( T): BSP 1/2 " Female thread
выход в разделы (A, B): BSP 3/8 " Female thread
Series connection (N): BSP 1/2 " Female thread
улей>
диапазон давления:
<улей>
Maximum pressure on the supply: 250bar
Maximum pressure on the return: 50Bar
Maximum pressure on sections: 300bar
улей>
overflow valve is factory set at 180bar ± 30 Bar.
It is recommended to check and set the correct pressure before start-up.
Possibility of independent regulation, full turn change by 30Bar.
Oil types recommended by AGRICOLA:
<улей>
rarer high-quality oil: Lotus AGROL BOXOL 26
a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
улей>
рекомендуемый диапазон температуры масла:
<улей>
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 C