Strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)
SET CONTAINS:
<улей>
WEP 8858-я < /B> welder
Support for the hotair stock
Reinforcing mesh 1 шт. with dimensions of 20x25 CM
a set of 6 nozzles in total
round with a diameter of 7 mm
round with a diameter of 9 mm
площадь 12x12 мм
+ Quick welding nozzle BUT
+ Reduction nozzle for the but nozzle
+ Супер Nozzle for welding in hard-to-reach places
<улей>
Plastic (JOINT) - PP strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Plastic (JOINT) - PP / EPDM strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Plastic (JOINT) - ABS strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Binder - MIX (100 grams) - Unmarked binder selected randomly. 100G may contain a MIX of unmarked binders of various types. Профили-треугольник или полоса или раунд. Цвет-предоминантно черный. Длина-около 45 см. Связующее не имеет никакого полезного листа с описанием типа, в заказе, чтобы избежать ошибок при сварке.
BUT nozzle in the photo on the right
the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
Welding without a but nozzle
SUPER NOZZLE, лонг бент (length 90mm / diameter of the outlet 5мм) for welding in hard-to-reach places.
The nozzle fits all plastic welding machines available in our offer.
Plastic (JOINT) - PP strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Plastic (JOINT) - PP / EPDM strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Plastic (JOINT) - ABS strip, 8 mm wide, approximately 45 cm long (50 grams), for welding plastics.
Binder - MIX (100 grams) - Unmarked binder selected randomly. 100G may contain a MIX of unmarked binders of various types. Профили-треугольник или полоса или раунд. Цвет-предоминантно черный. Длина-около 45 см. Связующее не имеет никакого полезного листа с описанием типа, в заказе, чтобы избежать ошибок при сварке.
general purpose binder
<улей>
Automotive
Industry
ELECTRONICS HOME APPLIANCES
Working temperature (depends on the performance of the welder and welding conditions) - 260-330 ° c
Reinforcing mesh - 1 PIECE
Ydimensions
<улей>
Dimension: 20x25 см
размер сетки: 1.6 мм
Wire Thickness: 0.4 мм
материал: гальванизированный
сварочная машина поставляется с электронным пластиковым сварочным гидом. это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. после покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
the photo shows the construction of the heating element
Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap
the photo shows the construction of a heating element covered with mica
Calculation of the profitability of welding
Typically, the price of the service is calculated based on the type of crack:
<улей>
difficult fracture - до 2/10 мм
<улей>
средняя трещина составляет 1.5 PLN / 10 мм
<улей>
- до 1/10 мм
<улей>
other cases of repair of plastic elements according to individual arrangements
for example: in case of a break of a moderately difficult bumper with a length of 70 cm, the purchase is returned after the repair of 2-3 bumpers.
Viber
Telegram
