Temperature control in the range of 100 ° C-500 ° C
Smooth regulation of air discharge, digitally controlled.Ли>
Air flow regulation up - 120 л / мин макс.Ли>
Strong heater made of thick wire (distinguished by greater strength and durability of the heating element)
Fast achievement of the desired temperature and high temperature stability
Blow type: brushless fan with soft start (high durability and надежность, quiet operation, low vibration)
есть микро-переключатель в держателе фляги с горячим воздухом, который, когда он кладет флягу обратно вниз, заставляет ее идти в режим ожидания, который расширяет жизнь нагревателя, выключает / сокращает поток воздуха, и thus saves electricity
SET CONTAINS:
WEP 858d welder
Support for the hotair stock
шнур питания
a set of 4 nozzles in total
round with a diameter of 7 mm
round with a diameter of 9 mm
площадь 12x12 мм
улей>
+ 1 but nozzle!
улей>
Plastic (JOINT) - PP triangle with a base of 4 mm, length about 45 cm (3 pcs.), for welding plastics
Plastic (JOINT) - ABS triangle with a base of 4 mm, approx. 45 см long (3 шт.), for welding plastics
Plastic (JOINT) - PP strip 8mm wide, about 45 cm long (3 pcs.), for welding plastics
Plastic (JOINT) - ABS strip, 8 mm wide, approx.45 см long (3 шт.), for welding plastics
улей>
Reinforcing mesh 1 шт.. with dimensions of 20x25 см
Stock photo on the right
BUT nozzle in the photo on the right
the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
our nozzle is on the right side of the photo
please pay attention to the air outlet gap for regulation with minimum Air supply! what the competition doesn't
Binder PP Profile strip - 3 pcs.
ABS binder Profile strip - 3 шт.
Binder PP треугольник профиль - 3 шт.
ABS binder треугольник профиль - 3 шт.
улей>
технические характеристики:
Length: approx. 45 см - 1 шт.
улей>
Profiles
8 мм wide strip
a triangle with a base of4 мм
улей>
general purpose binder
Automotive
Industry
ELECTRONICS HOME APPLIANCES
DESCRIPTION OF OFFERED BINDERS
BINDING PP
Application: general purpose binder in automotive, industry, electronics / household appliances и т. д.Ли>
точка плавления: 260-330 ° c
The marks you weld: PS, HIPS, SMA, SB, SAN, PS hard
улей>
ABS Бонд
Application: hubcaps, elements exposed to impacts, mirror housings, engine covers, fairings for scooters, quads и т. д.,Ли>
точка плавления: 310-360 ° c
The markings you weld: ABS, ASA, AES ABS + PC, ABS / PC, ABS-PC and производные.Ли>
улей>
* The temperature depends on the performance of the сварщик and the welding conditions
Reinforcing mesh - 1 PIECE
улей>
Ydimensions
Dimension: 20x25 см
размер сетки: 1.6 мм
Wire Thickness: 0.4 мм
материал: гальванизированный
Plastic Welding Guide
The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
the photo shows the construction of the heating element
Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap
Viber
Telegram
