СВАРОЧНАЯ МАШИНА 853D + NOZZLES + BOOT + PP PLASTIC + MESH

SET286

On this listing, you are buying:

Reinforcing mesh 1 шт. with dimensions of 20x25 см

плоский PP binder 100 г.

Set of 6 nozzles:

1. Square nozzle with a side of 12 мм
2. Round nozzle with a diameter of 4.4 mm
3. Round nozzle with a diameter of 7 mm
4. Round nozzle with a diameter of 9 мм
5. + Quick welding nozzle BUT
6. + Reduction nozzle

Plastic welding tutorial

Technical data of the WEP 853D station

Грот soldering iron

питания

РЧ тестер сигнала

NOZZLES:

Together with the station, you receive a set of nozzles, so you can start working with the device immediately.

Set of 6 nozzles:

1. Square nozzle with a side of 12 мм
2. Round nozzle with a diameter of 4.4 mm
3. Round nozzle with a diameter of 7 mm
4. Round nozzle with a diameter of 9 мм
5. + Quick welding nozzle BUT
6. + Reduction nozzle

• BUT nozzle in the photo on the right
• the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
• The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set

Welding with the BUT nozzle - an additional hole in the nozzle is provided for plastic insertion

Welding without a BUT nozzle

Reinforcing mesh - 1 PIECE, dimensions: 20x25 см

технические характеристики:

The welding machine comes with a guide for welding plastic. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством.

High-quality filler metal for welding plastics.

технические характеристики:

Profiles:

the contents of the set may vary depending on the amount of stock in stock.

By purchasing this device, we get five devices that can work independently or simultaneously. Как результат, эти устройства занимают меньше места, они более практичны и сохраняют энергию.

The сварщик is controlled by a dual-core micro-controller, thanks to which the пайки iron and power supply can work independently.

the device has an automatic cooling system when the station is turned off. Это означает снижение потребления теплового элемента горячей воздушной станции.

The welder remembers The last set temperature . Both the temperature of the hot air and the soldering Iron.

Stable and efficient Air exhaust is provided by a brushless fan. Это ensures The durability and reliability of the device.

Full and smooth regulation of the blowing power, set by means of a potentiometer, temperature is regulated by buttons, all parameters are visible on the LED display.

The WEP 853d welder is equipped with:

Calculation of the profitability of welding

Typically, the price of the service is calculated based on the type of crack:

for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.