SIKAFLEX 292I белый клей для бортового оборудования 0

SIKAFLEX 292i WHITE ADHESIVE FOR INBOARD EQUIPMENT 0

SIKA Sikaflex 292 A construction adhesive with high adhesion and mechanical strength, based on one-component полиуретана. Intended for mounting on-board accessories, hardware, Cable plates, etc. Non-flowing, one-component полиуретана клей with a thixotropic paste consistency that cures under the influence of atmospheric moisture. Это показывает отличные свойства клея и хорошую механическую силу. Sikaflex® - 292i complies with the fire spread requirements of the International Maritime Organization (IMO).

Product ADVANTAGES

▪ Good filling properties

▪ Can be painted

▪ Хорошая адгезия к многим материалам

▪ Wheelmark approved. Solvent free, very low VOC emissions

Sikaflex® - 292i is suitable for structural joints in marine structures that will be subjected to high dynamic stresses. Suitable for joining metals, in particular aluminum (including anodized), Metal primers and paint coatings (two-component systems) or ceramics, plastics such as GRP (unsaturated polyester resin), ABS и т. д.

CURING MECHANISM

Sikaflex® - 292i cures by reaction with atmospheric moisture. At low temperatures, the water content of the air is generally lower and the curing process is был несколько более медленной скорости

Sikaflex® - 292i является универсально устойчивым к обычной воде, морской воде, кислотам и щелочным растворам; temporarily устойчивым к топливам, минеральным маслам, растительным и животным жирам и маслам;

APPLICATION METHOD

Surface preparation Surfaces must be clean, dry and free from grease, oil and dust. Метод подготовки поверхности зависит от специфики субстрата и является необходимым для достижения долговременной связи.

Application Sikaflex®-292i can be applied at temperatures between 10 ° C and 40 ° C (ambient and product), however changes in reactivity and application properties should be considered. The optimum temperature of the substrate and the adhesive is between 15 ° C and 25 ° C. Keep in mind that the вязкость increases at lower temperatures. В заказе на использование приложения, клей должен быть установлен на комнатной температуре перед применением. <улей>

Capacity [l]: 0.6

Number of pieces in set: 1

A world leader in the development and manufacture of прилипатели, sealants and floor damping systems for the shipbuilding industry, as well as solutions for the bonding, уплотнительные and damping of yachts and sailboats. Flexibility and durability are the main parameters of products used in the construction and repair of boats and ships постоянно exposed to UV rays, wind удары and waves. Sika's flexible adhesive and sealant systems for the marine industry provide outstanding performance where it is needed. Sika s extensive range of marine products meets all your уплотнительные, прокачка, laying and bonding needs. These products are suitable for all types of construction: wood, fiberglass, aluminum или steel.