SEAL FOR AIR-CONDITIONING + UV

Liquid air conditioning sealant 30 мл + UV

The price is for the purchase of one item of the offered product

Liquid air conditioning sealant 30 мл + УФ -

leak STOP

DOES not CONTAIN R134a GAS ACCORDING to REGULATION (EC) 842/2006 ON certain FLUORINATED GREENHOUSE GASES

SEALING LIQUID Air CONDITIONING SYSTEM

Net content: 30 мл

for installations up to coolant capacity of 1.5 kg

for professional use only.

это не рекомендуется использовать его в герметически герметичных системах.

For your own safety, always wear safety glasses.

INSTRUCTIONS:

1. Recover the coolant from the air conditioning system (before using LEAK STOP, it is recommended to replace the installation filter to eliminate any possible moisture).

2. Создайте вакуум в системе кондиционирования воздуха всего за 5 минут. Check with a vacuum gauge that at least “-0.25 бар” is reached; perform a vacuum test and check that the value does not exceed “-0.23 бар” (necessary condition). В противном случае, утечка слишком велика, чтобы быть устранена с утечкой.

3. Create a vacuum with a pressure of "-0.29 bar" and hold for least 30 minutes.

4. После завершения вакуумной стадии отключите LP (Low pressure) pipe of the A / C charging station and connect LEAK STOP using connector B to a / C system on the LP (Low pressure) side.

5. Поверните утечку контейнера вверх, нажмите кнопку и подождите, чтобы герметик вышел полностью (около 8-10 секунд). Disconnect LEAK STOP from the A / C system.

6. Load the air conditioning system in accordance with the manufacturer's specifications.

7. Then immediately start the engine and air conditioning system for at least 20 minutes

Visit our other auctions

код продукта: MMW 007950025140