How it's working?
парковочный помощник facilitates the movement and parking of the vehicle by showing the distance to the obstacle and its position in relation to the vehicle.
пока вы двигаетесь вперед, the display automatically turns on each time the brake is pressed and remains active for approx.
15 seconds. После этого сирена отключилась, так как не отвлекала водителя, когда он стоял за другим транспортным средством. Если вам нужно измерить расстояние снова, просто примените тормоз снова
When driving in reverse, the display will be activated when reverse gear is engaged.
The distance is displayed, in addition, the built-in помогла signals with a sound when подойдя an obstacle - frequency
сигнал увеличивается с приближением к обступлению.
The display shows the distance from the obstacle with a resolution of 0.1 m
- частота сигнала увеличивается с подходом к obstacle
- the Siren generates5 различных частот звуков, которые позволяют вам легко судить, как далеко вы можете вернуться
- at a distance of less than 30 см, a continuous sound signals the need to absolutely stop the vehicle
< / div >
2 типа датчиков для выбора из
When purchasing, please choose a set of sensors
A- < /B> sensor silver metallic lacquered
B - matte black sensor ( can be painted )
The sensors have detachable cables.
возможность отсоединения кабеля облегчает монтаж , а в случае повреждения датчика его замена не требует демонтажа всей проводки.
The connection point is sealed with a силиконовое уплотнительное кольцо, and the entiretwisted fitting is a moisture-resistant, solid solution.
<улей>
Front Sensor cables length: 7 meters
Rear Sensor cables length :2meters < /li >
датчики имеют тонкий фланец , Спасибо, что они выглядят красиво в бампере, ирезиновые вкладки на стороне тела расширяются, когда они прижимаются к бамперу, спасибо, что датчики держат крепко и постоянно.
Inclination of the источника by 12 degrees upwards in relation to the sensor mounting plane perfectly replaces the angle silicone washers used in older, flat sensors.
if necessary, the angle of the emitted ultrasound beam can be properly adjusted by rotating the sensor.
This обеспечивает universal use both in vehicles with a high bumper and in those where the bumper is low.
The set includes a hole saw with a diameter matching the dimensions of the sensors.
You can easily make aesthetic holes in just a few minutes
Kit Contents:
<улей>
central
светодиодный дисплей
8 sensors
hole saw
wiring
улей>
The set is intended for vehicles with a 12V installation