SET of TWO MOTORCYCLE RISERS FOR INCH (2.54 MM) HANDLEBAR
Much better than the substitutes available on the market.
модель: RS-M10 (for Inch handlebars-2.54 mm)
color: chrome
height of the handlebar from the base of the risers: 2.16 inches (55 mm); this is comparable to the height of the handlebars with the factory grips
total height of risers: 5.2 inches (132 мм); The spikes are unscrewed
suitable for: motorcycle models with M10 bolts (details in the "assembly" section below)
the set includes: 2 risers, 2 винта M10-1. 5x60mm
улей>
Details:
chrome: chrome- plated according to cash register 8 (3 stages: copper-plated, nickel-plated and then chrome-plated), this process guarantees durability of the surface and a beautiful gloss
прочный металл
улей>
Additional information:
shipment in 24 hours
guarantee: on the basis of a receipt or invoice
улей>
Why is it worth changing risers:
adjusting the height of the handlebars as needed: Motorcycles use a standard handlebar height. In order to increase the comfort of riding and to get rid of pain in the middle part of the позвоночника resulting from incorrect height of the steering wheel, adjust its height to the rider's height (to find the best height of the steering wheel, reach out your hands and position them in the most comfortable place, then adjust the height of the steering wheel by help of risers).Ли>
quick improvement of appearance: risers will малый the beauty and character of your motorcycle
улей>
the photos show the actual product (photos are the property of our company - All rights reserved).
Dimensions:
согласившись на фото.
Установка:
Each riser consists of 2 main parts (lower and upper) and a detachable spike; in order to put on risers: 1) Unscrew The spike by turning it like a screw. 2) Unscrew the 2 screws under The spike, which will split the lower and upper part of the riser. 3) Insert the bolt from the bottom of the shelf in the motorcycle by screwing it into the bottom of the riser. 4) Insert The handlebar into the bottom of the riser. 5) put the upper part of the riser on the handlebar and screw it with two screws located in each of the risers. 5) Screw The spike onto the upper part of the riser (you can also not screw in the spike)
Assembly details:
handlebars: risers belong to motorcycle models with an inch handlebars (25.4 мм)
shelves: risers belong to motorcycle models with holes in the shelves for M10 screws (screw thickness: 10 мм)
bolts M10-1. 5x60 mm: The set includes bolts 60 mm long (length measured without the screw head), 10 mm thick, with a metric thread of 1.5
the depth of the bolt holes in risers: the bolt hole in the risers is нитку as much as 40 мм (the shelf in the place where the bolts are mounted must be at least 25 mm thick, otherwise the bolts should be shortened or shorter)
цель: risers are best presented on motorcycles such as: chopper, custom, cruiser, classic
улей>
Examples of motorcycle models with holes in M10 Bolt shelves:
мост Касасаки Вулкан VN 800/900/1500/1600 models (except some versions).Ли>
некоторые модели мотоциклов: Honda, Yamaha, Suzuki, Victory.Ли>
улей>
ATTENTION:
из-за разнообразия моделей мотоциклов, пожалуйста, убедитесь, что винты включены в комплект, чтобы соответствовать вашей модели мотоциклов перед покупкой.Ли>
At our other auctions we have risers with M12 bolt holes (metric thread: 1.75 and fine thread: 1.25) and risers for Harley Davidson motorcycles with 1-2 "-13 thread (used only on Harley-Davidson motorcycles, these bolts are available are with us, together with the appropriate risers).Ли>
Viber
Telegram
