SET of TWO MOTORCYCLE RISERS FOR Inch HANDLEBAR (2.54 MM)
Much better than the substitutes available on the market.
модель: RO-13 (for inch handlebars - 2.54 mm; other auctions have different heights of these risers and 7/8 inch risers - 22мм)
color: chrome
height of the handlebar from the base of the risers: 3.54 inches (90 мм); these risers increase the steering wheel by approx. 40 мм по высоте ручек на ручках
total height of risers: 5.12 inches (130 мм)
horizontal steering wheel shift: risers move the steering wheel 1.57 inches (40 мм); bring the steering wheel closer or further away from the driver (depending on the mounting method)
suitable for: motorcycle models with M12 bolts (details in the "assembly" section below)
set includes: 2 risers
улей>
Details:
chrome: chrome- plated according to cash register 8 (3 stages: copper-plated, nickel-plated and then chrome-plated), this process guarantees durability of the surface and a beautiful gloss
прочный металл
улей>
Additional information:
shipment in 24 hours
guarantee: on the basis of a receipt or invoice
улей>
Why is it worth changing risers:
adjusting the height of the handlebars and its position as needed: The standard height of the handlebars is used in motorcycles. In order to increase the comfort of driving and to get rid of pain in the middle part of the позвоночника resulting from incorrect height of the steering wheel, adjust its height and position (distance from the rider) to the rider's height (in order to determine the best height of the steering wheel, extend your arms and position them in the most comfortable position) place, then correct the height and position of the handlebars with risers).Ли>
quick improvement of appearance: risers will малый the beauty and character of your motorcycle
улей>
the photos show the actual product (photos are the property of our company - All rights reserved).п>
Dimensions:
согласившись на фото.п>
установка:
Each riser consists of 3 parts (the lower main part, the upper part that opens the handlebar hole, an overlay for the upper part of the riser, screwed with the screw indicated by the arrow in the photo); in order to put on risers: 1) Unscrew the screw indicated by the arrow in the photo, then remove the top riser cap. 2) Unscrew the 2 screws at the top of each riser (under The overlay), which will open the hole for the driver in the riser. 3) Insert the bolt from the bottom of the shelf in the motorcycle by screwing it into the bottom of the riser. 4) Insert The handlebar into the bottom of the riser. 5) прикрепите верхнюю часть стояка к ручке, чтобы она была прикручена двумя винтами на каждом стояке. 6) Put the overlay on the upper part of the riser, then screw it in with the screw indicated by the arrow in the photo.п>
Assembly details:
handlebars: risers belong to motorcycle models with an inch handlebars (25.4 мм)
shelves: risers belong to motorcycle models with holes in the shelves for M12 screws (screw thickness: 12 mm
thread in the holes for risers: the thread in the risers is adapted to screws with a thickness of 12 mm, with a metric thread of 1.75 (These screws are used as standard in most Japanese chopper / cruiser motorcycles. При закупке метрических винтов M12 для крепления ризеров, убедитесь, что их твердость меньше 8.8. )Ли>
depth of bolt holes in risers: the bolt hole in risers is нитку до 40 мм
цель: risers are best presented on motorcycles such as: chopper, custom, cruiser, classic
улей>
Examples of motorcycle models with holes in M12 Bolt shelves:
Most motorcycle models: Honda, Yamaha, Suzuki, Victory
Some Kawasaki motorcycle models
улей>
ATTENTION:
Due to the variety of versions of motorcycle models, before buying, make sure that the holes in the motorcycle shelf are adapted to screws with a thickness of 12 mm (the vast majority of Japanese choppers / сексуальную жизнь).Ли>
At our other auctions, risers with M10 bolt holes (metric thread: 1.5) are available.Ли>
At our other auctions, the same risers are available for Harley Davidson motorcycles with 1-2 "-13 thread (used only on Harley-Davidson motorcycles, these bolts are available from us together with the appropriate risers).Ли>
улей>
Distinction:
Risers are distinguished by a functional modification to your motorcycle.п>
Enjoy your shopping:
Motorcycle shops
Motorcycle showrooms
motorcycle services
wholesalers
individual clients
улей>
ATTENTION:
by sending us a photo after installing the product and agreeing to present the photo to our customers, you will receive an additional functional gift for a motorcycle for free.
(при покупке, please let us know if a photo will be sent, then we will send a gift together with the purchased product. )п>
At other auctions, we offer a wide selection of motorcycle parts and accessories:
Viber
Telegram
