Пластиковые Сварщик 8858 3x Nozzle 0.5 кг - Plastic Mesh
FAN-BLOW SOURCE
Hot air plastic welder with smooth temperature control. Strong and durable Heating element WITH STABLE, non-CRACKING STRUCTURE
контроль температуры в диапазоне от 100C до 480c
светодиодный дисплей
Ergonomic shape, with a non-slip handle, which facilitates safe work
улей>
Standard size of the stock outlet - all nozzles fit
What are you buying:
Welder for plastic WEP 8858-и
Stand for the butt of the сварщик
улей>
Set of 3 nozzles:
- квадратная насадка12x12 мм
- Round nozzle with a diameter of7 мм
- Round nozzle with a diameter of9 мм
PLASTIC (WELD, BOND )- 5x100 grams for welding plastics
ABS треугольник с базой (100 grams) about 45 CM long
PP треугольник с базой (100 grams) about 45 CM long
LDPE треугольник 4 мм 100 г length approx 45 см
PP / PE треугольник 4 мм 100 г length approx 45 см
PP / EPDM треугольник 4 мм 100 г length approx. 45 см
улей>
Reinforcing mesh
1 шт. with dimensions of 20x25 CM
PLASTIC 5x100 grams description below
Plastic (JOINT) - ABS triangle with a base (100 grams) about 45 CM long, for welding plastics
It is a typical материал, used for elements produced in the rotomolding technology, e.g. tanks in small fuel bases, tanks used in agriculture, tanks in sewage treatment plants
Plastic (JOINT) - PP triangle with a base (100 grams) about 45 CM long, for welding plastics
general purpose binder
Plastic (JOINT) - LDPE треугольник 4 мм 100 г
length approx. 45 см, for welding plastics
Plastic (JOINT) - PP / PE 4 мм 100 г треугольник
length approx. 45 см, for welding plastics
Plastic (JOINT) - PP / EPDM 4 мм треугольник 100 г
length approx. 45 см, for welding plastics
Automotive
Industry
ELECTRONICS HOME APPLIANCES
Working temperature (depends on the performance of the welder and welding conditions) - 260-330 ° c
ABS BOND
Application: It is a typical материал, used for elements produced in the rotomolding technology, e.g. tanks in small fuel bases, tanks used in agriculture, tanks in sewage treatment plants.Ли>
точка плавления: 310-360 ° c
The marks you weld: ABS, ABA, ABAK, ABS / PC ABS + PC, ABS / PET, AES, ASA, ASA / PC, SMA, SB
улей>
BINDING PP
Application: It is a typical material for general use in automotive, industry, electronics / household appliances и т. д.Ли>
точка плавления: 260-330 ° c
The marks you weld: PS, HIPS, SMA, SB, SAN, PS hard
улей>
PP / PE Binder
Application: Containers made of PP, elements made of PP with a low melting point
точка плавления: 250-310 ° c
The markings you weld: PP / PE, PP + E, PP + PE
улей>
BINDING PP / PEDM
Application: Bumpers, wheel arches, fenders, Engine housings, Side moldings, sills and other flexible elements
точка плавления: 260-330 ° c
The marks you weld: PP / EPDM PP + EPDM PP-EPDM, PP / EPD, PP / EP
улей>
LDPE BINDER
Application: Automotive for various types of tanks, such as: brakes, cooling tanks.Ли>
точка плавления: 240-280 ° c
The labels you weld: PE, LDPE, PE LD, LD PE, PE / LD, LD / PE
Reinforcing mesh - 1 PIECE
Ydimensions
Dimension: 20x25 см
размер сетки: 1.6 мм
Wire Thickness: 0.4 мм
материал: гальванизированный
The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
The сварщик состояние живых характеризуется is by:
Digitally controlled Air discharge regulation.Ли>
контроль температуры от 100 ° C до 480 ° C
светодиодный дисплей
Air flow source:fan
Air flow: up составляет 120 л / мин
Blowing type: Soft start brushless fan
Cable length:1m
Device power: 700W
Size: 305x60x60 [length, height width]
a strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)
The photo shows the construction of a heating element covered with mica
Strong and durable heating element
The сварщик, is distinguished by a solid, compact housing, thanks to which it takes up little space. Сварщик очень прочный. Операционные параметры показываются на светодиодном дисплее.
The сварщик can repair:
headlamps,
bumpers,
mirrors,
Heater casings,
batteries,
air-conditioning,
спойлер,
petrol, oil and water tanks as well as truck body parts
GSM phones
улей>
The welder can also be used to repair electrical installations: by shrinking the sleeves.
Along with the welding machine you get a set of nozzles, so you can start working with the device immediately.
Calculation of the profitability of welding
Typically, the price of the service is calculated based on the type of crack:
crack difficult до PLN 2 / 10mm
средняя трещина, до 1.5 PLN / 10mm
crack easy up to PLN 1 / 10mm
other cases of repair of plastic elements according to individual arrangements
улей>
for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.
Viber
Telegram
