Plastic welder 858d 9x Nozzle NOZZLE BUT 0.2 kg of plastic
FAN-BLOW SOURCE
The BEST PLASTIC WELDER- WEP 858D-PRODUCT SHOWN IN the PICTURE - other MANUFACTURERS IMITATE US
NOZZLES x10 with the but nozzle
PLASTIC (WELD, BOND) - 4x50 grams, description below
NET
SET CONTAINS:
WEP 858d welder
Support for the hotair stock
шнур питания
улей>
a set of 10 nozzles in total!
- round with a diameter of 7 mm
- round with a diameter of 9 mm
- площадь 12x12 мм
- round with a diameter of 3mm, total height 78mm
- round with a diameter of 5, total height 78
- round with a diameter of 8mm, total height 78mm
- long round nozzle at an angle of 3mm / 85mm
- long round nozzle at an angle of 5 мм / 85 мм
- круглая насадка 8 мм / 85 мм long
- + 1 but nozzle
- + reduction nozzle for the but nozzle
PLASTIC ( WELD, BOND) - 4x50 grams-description below
Plastic (JOINT) - ABS triangle (50 grams) about 45 CM long, for welding plastics
Plastic (JOINT) - ABS strip (50 grams), approx. 45 см long, for welding plastics
Plastic (JOINT) - PP triangle (50 grams) approx. 45 см long, for welding plastics
Plastic (JOINT) - PP strap (50 grams) approx. 45 см long, for welding plastics
улей>
Reinforcing mesh 1 шт. with dimensions of 20x25 см
The most popular plastic сварщик, он Аллегро with smooth temperature and blowing power regulation. Сварщик отличался большим диапазоном температурного регулирования и долгим сроком службы нагревательного элемента.
The welder is designed for welding, forming: Car elements such as bumpers, mirrors, tanks, headlights and all plastic elements. Welder может быть использован для сварки любого пластикового элемента, который подходит для лечения тепла.
Thanks to the small size of the device, a strong, durable heating element, work with the welding machine is very efficient.
The WEP 858D сварщик состояние живых характеризуется is by:
регулирование воздушного потока составляет 120 л / мин макс.
temperature regulation in the range of 100C - 500C
светодиодный дисплей
Smooth regulation of air discharge, digitally controlled.Ли>
a strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)
Fast achievement of the desired temperature and high temperature stability
Fan driven by a brushless motor (high durability and надежность, quiet operation, low vibration)
в держателе фляги горячего воздуха есть микро-контакт, который, когда он кладет флягу вниз, заставляет ее идти в режим ожидания, который расширяет жизнь нагревателя и выключает / уменьшает поток воздуха, и это экономит энергию.Ли>
- BUT nozzle in the photo on the right
- the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
- The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
- Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
- Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
- Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
- our nozzle is on the right side of the photo
- please pay attention to the air outlet gap for regulation with minimum Air supply! what the competition doesn't
БОНД DESCRIPTION
BINDING PP
Application: general purpose binder in automotive, industry, electronics / household appliances и т. д.Ли>
точка плавления: 260-330 ° c
The marks you weld: PS, HIPS, SMA, SB, SAN, PS hard
улей>
ABS Бонд
Application: hubcaps, elements exposed to impacts, mirror housings, engine covers, fairings for scooters, quads и т. д.,Ли>
точка плавления: 310-360 ° c
The markings you weld: ABS, ASA, AES ABS + PC, ABS / PC, ABS-PC and производные.Ли>
Reinforcing mesh - 1 PIECE
The reinforcing mesh is made of high-grade steel,
улей>
It is covered with a layer of zinc to prevent possible corrosion.Ли>
улей>
Ydimensions
размер сетки: 1.6 мм
Wire Thickness: 0.4 мм
материал: гальванизированный
улей>
Reinforcing mesh for welding plastic It is ideal for recreating missing elements such as:
handles,
bumpers и т.Ли>
The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
- the photo shows the construction of the heating element
- Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap
Viber
Telegram
