PLASTIC WELDER WEP 852D + + NOZZLES ПЛАСТИКОВАЯ СЕТКА

SET308

On this listing, you are buying:

Reinforcing mesh with dimensions of 20x25 см

hotair nozzles:

1. round with a diameter of 4.4 mm
2. round with a diameter of 8 mm
3. round with a diameter of 9 mm
4. round with a diameter of 3mm, total height 78mm
5. round with a diameter of 5, total height 78
6. round with a diameter of 8mm, total height 78mm
7. long round nozzle at an angle of 3mm / 85mm
8. long round nozzle at an angle of 5 мм / 85 мм
9. круглая насадка 8 мм / 85 мм long
10. + nozzle BUT!
11. + Reduction nozzle

A Filler metal for welding plastic

Welding Tutorial

The WEP 852D + сварщик состояние живых характеризуется is by:

!!! ATTENTION !!!

Along with the welding machine you get a set of nozzles, so you can start working with the device immediately

BUT nozzle in the photo on the right

but nozzle allows for quick welding, as the binder is simultaneously melted and guided inside the nozzle and pressed against the workpiece.

насадка используется для быстрой сварки больших прямых поверхностей .

The nozzle is used for welding with a bar binder for round, треугольной and трапециевидные profiles made of plastic, max dia. 6 мм.

BUT nozzle works with any device with a Hot air nozzle Tip diameter of 9 мм.

Welding with the BUT nozzle - an additional hole in the nozzle is provided for plastic insertion - max dia. 6 мм

Welding without a BUT nozzle

High-quality filler metal for welding plastics.

You can use the offered binder repair: car parts, such as bumpers, mirrors, various body parts, air inlet covers, grilles, buttons, internal fittings, wheel arches, or car interior fittings, housings of electronic devices, household appliances, etc.

технические характеристики:

Plastic Welding Guide

The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.

The WEP 852D + сварщик for plastic is a very useful device for everyone who needs to connect plastic elements in a short time. У вельдера был контроль температуры и сила выдуваемого воздуха. Welder additionally equipped with an automatic cooling system after work. Это эффективно расширяет жизнь теплового элемента.

It is most often used for welding elements such as:

You can use the welder to repair electrical installations: by shrinking the sleeves.

Calculation of the profitability of welding

типично, the price of the service is calculated based on the type of crack:

crack difficult до 2 / 10мм рублей

средняя трещина, до 1.5 PLN / 10mm

взломать легко до 1 / 10мм рублей

other cases of repair of plastic elements according to individual arrangements

улей>

for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.

• Rubber feet
• Red Shipping bolts , please unscrew before using the device!

• a tipped stock marked 907A with a power of 60W 5pin

Connecting the heating element

The blue andred wires are connected to the Temperature sensor (Blue is минус) (Red is plus)

2 leads in a transparent (transparent) sleeve are used to connect the heater

• the photo shows the construction of the heating element
• heater with a thick wire is wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by gentle tapping
улей>

Connecting the heating элемент

• Blue and red wires are for thermocouple connection (Blue is negative) (Red is positive)
• The red wires are used to connect the heater