MOTIP AUDI l041 paintwork repair kit

MOTIP AUDI l041 paintwork repair kit

Что вы ищете?

MOTIP AUDI l041 paintwork repair kit

В наличии
Код товара:
8259300107
2368,00 ₴
Bodywork damage repair kit подходит для AUDI лак горячей сушки: L041 -SCHWARZ

(46830)

the kit includes:

<улей>
  • filling putty
  • Primer лак горячей сушки
  • Basecoat-AUDI L041
  • лак горячей сушки covering the transitions - spotblender
  • < / div >

    All parts of the set come from the reputable manufacturer of Motip varnishes. Набор разрешений на полный ремонт поврежденного кузова в соответствии с инструкциями ниже. Набор включает в себя лучшие и доказанные продукты, которые используются каждый день тысячами людей, любителями и профессионалами на поле варнишинга.

    Remember: The photo above is иллюстративных only, and the color shown on them may отличаются slightly from the actual color. Экраны компьютеров и телефонов могут различить оттенки.

    Product description:

    the set includes products that are most often chosen by our clients and they are:

    <улей>
  • filling putty 250 г
  • Gray primer лак горячей сушки 500 мл
  • Base coat, 400 мл
  • лак горячей сушки covering the transitions of spotblender 200 мл
  • все вариации характеризуются очень хорошим прикрытием, коротким временем сушки и сопротивлением царапинам и непогашенным погодным условиям.

    the set size is ideal for repairing Local paintwork damage.

    NOTE: Store in a place not exposed to sunlight and away from other heat sources

    Repair of поврежденных paint coating

    Step 1

    Remove rust, loose лак горячей сушки residues. Sand the surface with fine sandpaper

    The surface prepared in this way should be clean, dry and free of grease

    Step 2 - Use the putty from the kit

    In the case of a larger cavity, apply the putty.

    After the putty has hardened, Sand off the excess until a smooth transition between the varnish and the repaired item is obtained.

    Step 3 - Using a primer лак горячей сушки

    If the cavity is deep or if a putty is applied, a primer should be used.

    Before применение the primer, secure the adjacent elements with окраски tape and paper.

    Apply the undercoat in several thin layers.

    Step 4 - Use a base coat

    применить a spray Base coat in several thin layers on the prepared surface.

    Make sure to keep an appropriate, minimum distance 20cm between the can and the painted элемент

    Step 5 - Use of clearcoat and spotblender

    In the case of metallic paint: the painted surface should be covered with a colorless лак горячей сушки after drying.

    if there is a difference between the old and the new version of the varnish, use the Spot blender varnish - varnish that levels The transitions.

    Напишите ваш собственный отзыв
    Вы пишете отзыв на товар:MOTIP AUDI l041 paintwork repair kit