FLIP CHIP LED - is an innovative LED chip assembly technology that eliminates many disadvantages typical of technologies commonly used on the market:
• UNIQUE Heat MANAGEMENT
• UNIQUE LIGHT EMISSION
• UNIQUE ELECTROMECHANICAL PARAMETERS
• UNIQUE LOW COST
1. In a conventional LED hole, significant amounts of heat are dissipated through the front of the LED
2. В флип-диоде чипа, это было возможно, чтобы удалить большую часть тепла через субстрат, спасибо за то, что тепло не было в более эффективном пути.
Conventional LED shows high thermal resistance due to the low thermal conductivity of the Sapphire substrate.
Significant amounts of heat are emitted from the active layer through the diode front, the инкапсуляции материал and then dispersed in the air.
The diode made in the Flip Chip technology is designed on a термально conductive substrate with metal connections,
чтобы создать лучший способ удалить большинство тепла через субстрат. Спасибо за это решение, источник света
using FLIP CHIP LED technology is much cooler. Это позволяет вам сопротивляться из-за больших тепловых раковин, и большая свобода в проектировании осветительных решений.
проблема с извлечением света из чипа является металлическим контактом, который obscure part of the light-emiting surface. In classic LEDs, losses associated with the classic method of assembly reach 20%. Эта проблема не в случае с откидными чипами, которые не используют провода для подключения светодиодных чипов.
Benefits:
• Lower weight and lower price of the finished Lighting element thanks to possibility of resignation from heavy and expensive heat sinks
• Long service life (до 60,000 operating hours)
• Lighting of the entire surface, instead of point sources характеристика for ordinary and POWER LED нем
• Absolutely flat shape of the lighting module allowing the use of innovative assembly methods
Thanks to the use of the latest technology with the use of FLIP CHIP нем, it was possible to design a small bulb (the small core of the bulb allows installation in very small lenses, e.g. in Fiat Punto II, where most of the LED bulbs are too large, at the same time build inside systems that cheat the canbus system in cars (eg. opel insignia does not display burnt bulb error). High luminous efficiency of FLIP CHIP diodes together with high current intensity of 2.45 amps (high beam), 2.20 amps (low beam), at a voltage of 14.4 V позволил нам преодолеть 5000lm от одной лампы. Small construction, narrow bulb shaft, no external elements (module / driver) allow for much easier installation in most cars than in the case of competitor bulbs.
Type H4
Color 6000K (COOL WHITE)
FLIP CHIP Diodes type
яркость 5000lm / bulb
34w power
рабочее напряжение 9V-32V
рабочая температура -40 ° C до + 50 ° C
Canbus Yes
Removable base Yes
Warranty 12 Months
Нем placed at the same height as the light source in an ordinary halogen bulb, thanks to which we obtained the so-called "cut-off", thanks to which we do not blind anyone while driving on our bulbs.
Viber
Telegram
