H30-12-28 - Конвертер 12V (11-16V) в 28V 30A step up
The store will not work correctly in the case when cookies are disabled.
H30-12-28 - Конвертер 12V (11-16V) в 28V 30A step up
Основные параметры
Дополнительная информация
Состояние |
Новый |
Номер детали |
H30-12-28 |
Номера заменяемых деталей |
1200196-01, H30-12-28, |
Оригинальный номер детали |
1200196-01, H30-12-28, |
Описание
Reliable converter increasing the voltage (step up) from 12V to 28V 30A 840ВТ
<улей>
input voltage range for correct and stable operation is 11-16v , energy efficiency 94%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
solid терминал ввода / вывода
- модель : H30-12-28
- Converter type : DC / DC
- Voltage change : Step up
- типичное входное напряжение [V] : 12
- минимум input voltage [V] : 11
- Maximum input voltage [V] : 16
- Output voltage [V] : 28
- Ripple output voltage [MV pp] : 240
- Accuracy of the output voltage [%] : 1.5
- Максимальный выходной ток [A] : 30
- рекомендуемый минимум текущего потребления [a] : 0.5
- максимальная мощность нагрузки [Вт] : 840
- рекомендуемая минимальная мощность нагрузки [Вт] : 14
- Maximum energy efficiency [%] : 94
- Idle current max. [А] : 0.1
- line regulation [%] : 0.2
- load regulation [%] : 0.2
- температура coefficient [% / ° C] : 0.03
- Минимальная рабочая температура [° C] : -20
- максимальная рабочая температура [° C] : 60
- рабочая частота [кГц] : 100
- Overload / short-circuit protection for output : Overload shutdown of the инвертор
- Thermal protection : Limitation of the output current after exceeding the max. operating temperature until it cools down
- Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
- Protection when the voltage exceeds max. Inputs : Output circuit protection
- Подключение : Electrodes with шестиугольная screws on the моделями
- класс Tightness : IP68
- Length [mm] : 180
- Width [mm] : 127
- Thickness [mm] : 63
- Housing construction : Aluminum profile, продольно ribbed
- Sealing : epoxy resin
- Cooling : Passive / the case acts as a heat sink
- Weight [g] : 1800
- Primary and secondary Side insulation: No-common ground