H05-24-48 - Конвертер 24V (18-35v) до 48V 5A step up
The store will not work correctly in the case when cookies are disabled.
H05-24-48 - Конвертер 24V (18-35v) до 48V 5A step up
Основные параметры
Дополнительная информация
Состояние |
Новый |
Номер детали |
H05-24-48 |
Номера заменяемых деталей |
1200203-01, H05-24-48, |
Оригинальный номер детали |
1200203-01, H05-24-48, |
Описание
Reliable converter increasing the voltage (step up) from 24V to 48V 5A 240W
<улей>
input voltage range for correct and stable operation is 18-35v , energy efficiency 94%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
высококачественные медные соединительные кабели
- модель : H05-24-48
- Converter type : DC / DC
- Voltage change : Step up
- типичное входное напряжение [V] : 24
- минимальное входное напряжение [V] : 18
- Maximum input voltage [V] : 35
- Output voltage [V] : 48
- Ripple output voltage [MV pp] : 550
- Accuracy of the output voltage [%] : 1.5
- Maximum output current [a] : 5
- рекомендуемый минимум текущего потребления [a] : 0.5
- максимальная мощность нагрузки [Вт] : 240
- рекомендуемая минимальная мощность нагрузки [Вт] : 24
- Maximum energy efficiency [%] : 94
- Idle current max. [А] : 0.1
- line regulation [%] : 0.2
- load regulation [%] : 0.2
- температура coefficient [% / ° C] : 0.03
- Минимальная рабочая температура [° C] : -20
- максимальная рабочая температура [° C] : 60
- рабочая частота [кГц] : 43
- Overload / short-circuit protection for output : Overload shutdown of the инвертор
- Thermal protection : Limitation of the output current after exceeding the max. operating temperature until it cools down
- Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
- Protection when the voltage exceeds max. Inputs : Output circuit protection
- Connection : Integrated cables
- Длина кабеля [мм] < /B> : 165
- класс Tightness : IP68
- Length [mm] : 74
- Width [mm] : 74
- Thickness [mm] : 31
- Distance between the mounting holes [mm] < /B> : 65.1
- монтажные отверстия diameter : 5.3
- Housing construction : Die-cast aluminum, cross-ribbed
- Sealing : epoxy resin
- Cooling : Passive / the case acts as a heat sink
- Weight [g] : 280
- Primary and secondary Side insulation: No-common ground