The device is manufactured in Poland by the всемирно известный Prodig-Tech company specializing in this type of devices.
GL-1 Fe varnish thickness gauge используется дляmeasure thickness of the Varnish layer applied to a steel or galvanized steel sheet car . Измерение сделано путем применения датчика к проверенной поверхности . The measurement is presented on the LCD display with 2 lines, 8 characters each. The Measurement resolution is 1 μm and the measuring range is from 0 μm is 1100 μm. The meter has a zeroing function ( calibration) - The Zeroing plate is included.
The built-in memory of 100 measurements allows you to freely view the measurements after performed measurements operations . Память не стерлась после выключения устройства или удаления батареи.
the device has a built-in display backlight, который облегчает измерение в темных комнатах (eg. in the garage). The meter is operated from the level of the Six-function main меню: MEASUREMENT, MEMORY, SWITCH OFF, MEMORY CLEARING, ZERO, RESOLUTION. the operation of the meter is very intuitive, The меню is in Russian !
In the appendix (in the "Additional information" section) there is a User manual of the device (in PDF format), который позволит вам познакомиться с функциями и возможностями устройства в деталях.
Viber
Telegram
