GPT universal Gear indicator white GI1001W
GPT gear display-the basic display model of this company.
Very readable, failure-free. Useful for every motorcyclist. Fits most motorbikes manufactured after 2000 that have an electronic speedometer and тип тахометра (signal method).
the display shows the gear the motorcycle currently in, including neutral.
размеры [мм]: 33x23
Display color: White
User MANUAL:
This version only fits vehicles equipped with an electronic speedometer as well
тахометр. Это не будет соответствовать автомобилям, оснащенным механическим спидометром.
Cable diagram:
There are 4 colors of cables which are responsible for:
BROWN = NEGATIVE GROUND
GREEN = POSITIVE для подключения с 12V батареей
YELLOW = SPEED SIGNAL
WHITE = rotation SIGNAL
подключите кабели к батарее (12V). Brown = negative -, green positive +.
Connect the yellow cable to the speed signal cable and the white cable to the cable
responsible for the RPM signal. Чтобы было легче найти правильные кабели и цвета в
motorcycle, you can use GPT diagrams available at this address:
http://www.gpt.it/GPT_Grand_Prix_Technology/download.html
Программирование:
1. Включи зажигание, "П" будет на дисплее, чтобы начать Программирование.
2. Urochom the engine
3. The" P "will disappear and the number" 1 " will blink.
4. Shift into first gear with a slight throttle opening and RPM maintenance
2 / 3.000 rpms
5. The LED will flash (which means the gear is memorized), then will appear on the display
next run (2)
6. Repeat for all gears 3,4,5,6
7. After programming The last gear (in this case 6) the display will show "7",
depress The clutch and shut off the engine
8. Programming complete.
NOTES: это программа The gears, we must have a минимум of 3 gears.
Checking the correctness of programming:
Start the engine, if programming is complete the display will show an " r " for one
second, then " 6 " for one second.
Check that the gears are programmed correctly. Where the процедура была
incorrect, it is necessary to RESET the indicator.
процедура сброса:
Turn on the ignition, The indicator will show " r "for one second, while the indicator will show" 6 " for one second
turn off the ignition as soon as possible. Repeat this action 5 times (until appears on the display
"p"instead of "r". Wait until the display shows "1". At this time
previous settings will be lost and can be reprogrammed.
Manufacturer's code: GI 1001/2001
Viber
Telegram
