светодиодные лампы HEADLAMPS H3 6000K 12 / 24V
Type: H3
Color: 6000K (COOL WHITE)
LED type: FLIP CHIP
яркость: 5000lm
мощность: 34w
рабочее напряжение: 9V-32V
рабочая температура: от -40 до 50 градусов
Canbus: YES
Removable base: YES
Цель: OFFROAD
FLIP LED CHIP - is an innovative LED chip assembly technology that eliminates many disadvantages typical of technologies commonly used on the market:
• UNIQUE Heat MANAGEMENT
• UNIQUE LIGHT EMISSION
• UNIQUE ELECTROMECHANICAL PARAMETERS
• UNIQUE LOW COST
1. In a conventional LED hole, significant amounts of heat are dissipated through the front of the LED
2. In the FLIP CHIP diode, it was possible to remove most of the heat through the substrate, thanks to which the heat Is dissipated in a more efficient way.
Conventional LED shows high thermal resistance due to the low thermal conductivity of the Sapphire substrate.
Significant amounts of heat are emitted from the active layer through the diode front, the инкапсуляции материал and then dispersed in the air.
The diode made in the Flip Chip technology is designed on a термально conductive substrate with metal connections,
чтобы создать лучший способ удалить большинство тепла через субстрат. Спасибо за это решение, источник света
using FLIP CHIP LED technology is much cooler. Это позволяет вам без больших и больших тепловых раковин, и больше свободы в
designing lighting solutions.
проблема с извлечением света из чипа является металлическим контактом, который obscure part of the light-emiting surface. In classic LEDs, losses associated with the classic method of assembly reach 20%. Эта проблема не связана с тем, что мы не используем провода для подключения светодиодных чипов.
Benefits:
• Lower weight and lower price of the finished Lighting element thanks to possibility of resignation from heavy and expensive heat sinks
• Long service life (до 60,000 operating hours)
• Lighting of the entire surface, instead of point sources характеристика for ordinary and POWER LED нем
• Absolutely flat shape of the lighting module allowing the use of innovative assembly methods
Thanks to the use of the latest technology with the use of FLIP CHIP нем, it was possible to design a small bulb (the small core of the bulb allows installation in very small lenses, e.g. in Fiat Punto II, where most of the LED bulbs are too large, at the same time build inside systems that cheat the canbus system in cars (eg. opel insignia does not display burnt bulb error ). The high luminous efficiency of FLIP CHIP diodes together with a high current intensity of2.5 amps at a voltage of 14.4 V позволил нам преодолеть 5000lmот одной лампы. Small construction, narrow bulb shaft, no external elements (module / driver) allow for much easier installation in most cars than in the case of competitor bulbs.
Viber
Telegram
