E20-81-009-02-22 - Springs Eibach SportLine Seat LEON (1P1)

E20-81-009-02-22 - Springs Eibach SportLine Seat LEON (1P1)

Что вы ищете?

E20-81-009-02-22 - Springs Eibach SportLine Seat LEON (1P1)

В наличии
Код товара:
8760968759
10143,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали E20-81-009-02-22
Описание
Springs Eibach SportLine Seat LEON (1P1) (E20-81-009-02-22)

Product specification:

<улей>
  • производственный год: 05.2005-12.2012
  • емкость двигателя: 2.0 TDI, 2.0 TDI 16V, 2.0 TFSI, 2.0 TDI, 1.6 TDI, 2.0 Cupra R, 2.0 TDI, 1.6 TDI, 2.0 TFSI, 2.0 FSI, 2.0 TFSI, 2.0 TFSI, 1.8 TSI, 1.9 TDI
  • Number of springs included: 4
  • передняя ось нагрузки: 1130 кг
  • максимальная нагрузка на ось сзади: 930 кг
  • Front lowering: 45 - 50 мм
  • задний низкий: 35 мм
  • Certificate: with general approval for use (ABE)
  • Eibach Sportline is a spring system, designed for demanding users who expect the highest performance on the road with a minimum loss of comfort and maximum handling quality.Thanks to them, we achieve dynamic handling, which we owe to an extremely оборудование lowering of the car's center of gravity and a precisely designed system of spring прогрессия Low center of gravity reduces vehicle tilt during acceleration, cornering and тормозная Lowering up to 50 мм

    • If values E. g. 30 are indicated in the place of the lowering, it means that the two front springs lower the front of the vehicle by about 3 cm.Если низкий уровень не превышает 4 см, то пружины могут быть использованы как стандартные с серией амортизаторов. with shortened travel (shock absorbers of this type are also available at our auctions)
    • Together with the springs, we send a purchase document, which is a confirmation of the transaction and the basis for filing a possible complaint
    • The TÜV certificate is a document confirming The approval of a product for use on public roads
    • the values of the reduction of the vehicle specified in the auction refer to the installation of springs in series cars (new, factory vehicles). одна центральная дыра, спортивные подвески, LPG установки и другие также применяются к спортивным автомобилям, предлагаемым производителями этих автомобилей
    Technical Notes:
    1. Unless otherwise stated, lowering the value listed in our catalog for vehicles with factory-made (series) lowering suspension will be lower by the value of the factory-set lowering. Unless otherwise specified, the products in this catalog are not intended for vehicles with factory-made (сериал) booster suspension (e.g. Offroad, Crossover packages).
    2. when selecting a product, you should rely on the data in the TÜV certificate or the Abe document.
    3. Before installation, please compare the markings on the received product with the markings in the TUV or ABE document (included in packages or available for download on the Eibach website)
    4. If any discrepancy is found, the set should not be installed
    5. Installation should be carried out in a specialized workshop with qualified employees and appropriate tools.
    6. The mounting position (up-down) is marked with an overprint - The arrangement of the text suggests the correct position.
    7. After mounting The springs / Suspension components, check the wheel alignment.
    8. если оригинальные амортизаторы плохо работают, рекомендуется использовать новые-стандартные или спортивные.
    9. For Sportline springs, we recommend that you purchase sports shock absorbers, e. g. Bilstein B8.
    10. All wheel / tire combinations permitted by the manufacturer are possible with the springs in place.
    11. Depending on the engine version, gearbox, equipment and tolerances of the car manufacturer, the reduction values may отличаются by a few mm from the values indicated in this catalog. The lowering value will be relatively lower in the case of a series (factory) lowering.
    12. the use of our products is for series vehicles. In the case of modifications to the car or additional equipment (this also applies to original products, optionally offered by the car manufacturer! ) such as a heavy duty brake system( E. G. ceramic discs), mounting The wheels with one central hole, sports suspension, LPG installation и т. д. - это возможно, что сборка нашей продукции не будет возможной. Все данные основаны на новых автомобилях. Измерительные точки: прямая линия, соединяющая центр концентратора с нижним краем крыла. Эти оценки и могут различаться в зависимости от транспортного средства.
    13. If your car ' s stock suspension has electronic damping, the use of B12 or Pro-Street-s suspension will result in the loss of this function. The error displayed on the on-board computer after installation can be removed in an authorized salon. Если есть возможность для вашего автомобиля, мы рекомендуем использовать Pro - Tronic kit, чтобы устранить ошибку.
    14. Without self-leveling system (nivo).
    15. Except for 4x4 (4WD) models.

    Catalog photos, individual references may be slightly different in reality.