ДИЗЕЛЬНЫЙ ИНЖЕКТОР PULLER FORD ECOBLUE 2L

LASER TOOLS is the uk's leading automotive brand that offers a full line of high quality traditional hand tools as well as a growing range of specialty tools designed to assist you in tough and awkward conditions.

These tools are the result of cooperation between technicians working on today ' s cars and owners of professional car repair shops.

The cooperation of these experts allowed for the development of fully functional tools reducing the time of activities performed in the workshop to a minimum, and the use of the highest quality materials обеспечивает a long service life of these tools.

DIESEL INJECTOR PULLER FORD ECOBLUE 2L

this speeder (# 7912) is designed для восстановления clogged injectors from Ford 2.0 L Diesel EcoBlue engines as described by Ford. Injector Removal is required for any service or repair work that requires the removal of the Cam cover, цилиндрическая головка, or camshafts

the set is complete and includes all the elements shown in the picture.

The photos below show exactly this set. The silver color of the parts shown has been changed to black (as shown in the image above).

IMPORTANT: Before use, make sure the pressure screw is well смазкой with molybdenum дисульфиде grease.

NOTE: последующий процесс был разработан для удаления закрытого инжектора, который может удалить инжекторы без ущерба для инжектора и сделать инжектор непригодным .

Step 1 prepare a seized injector

Remove the injector fuel supply (a) and return lines (b), and finally the injector retaining bracket (d).

Then-thoroughly clean the area around the injector and dip it in a release agent. Дольше оставить инжектор для замачивания, легче будет его вытащить.

Step 2

Break the fuel injector return plug (e) and electrical connection (f).

Step 3

Install the supplied injector top removal socket (A) over the top of the injector and use the appropriate socket to remove the top of the injector by turning it counterclockwise (as shown in the diagram)

then clean the injector bore thoroughly and remove any loose internal components from the bottom of the injector. Затем замочите его в Агенте.

Step 4

Screw the lower injector adapter (B) into the end of the set screw (C), then thread the assembly into the bottom of the injector (минимум 6 оборотов). Make sure it is fully screwed in.

Step 5 - Removal

Lubricate the set screw with grease and screw the set nut and bearing assembly onto the set screw. Пока сборка не кончилась, голова цилиндра. Продолжаем извлечение инжектора.

Very good job!

Producer: Laser Tools - Great Britain

No.каталог: 7912