Air preparation block, 1/2 ", 0-10 бар
• вход 1/2 "
• Air preparation unit: reducer with Pressure gauge + dehydrator + oiler
• профессиональное фильтрующее устройство для повышения эффективности подготовки сжатого воздуха к Силовым машинам и пневматическим инструментам. Спасибо за использование комплекта, полированного, влажного и маслянистого воздуха, который оставляет компрессор сухим, очищенным от твердых частиц и насыщенным свежим маслом.
• Operation of the air treatment unit:
* 1. Дегумидификация увлажненного воздуха для удаления конденсации воды, которая удерживается и конденсируется в резервуаре с легким дренажом,
* 2. Separating The used oil removes the oil oxidized in the compressor at high temperature, which behaves like an acid,
• 3. Air filtration of solid particles such as dust and metal particles, filtration efficiency 40 microns,
* 4. Reduction and maintenance of a constant operating pressure in the range of 0-10 bar,
* 5. Accurate pressure reading on the pressure gauge,
• 6. Saturation of the air with oil mist,
• Benefits of using an air preparation block:
- Protection of air tools against the harmful effects of moisture and used oil in the compressor.
- Uninterrupted lubrication of components exposed to friction.
- Extended service life of pistons, actuators and impact mechanisms.
- The assurance of optimal and failure-free operation of the equipment powered in accordance with the manufacturer's recommendations.
- Guarantee of constant operating pressure in the installation, regardless of fluctuations in compressor parameters.
• Operating notes:
- Oil mist вводили under pressure is effectively delivered up to 10m вниз по течению of the oiler,
- масло должно быть подано с помощью регулирующего винта на верхней части прозрачного купола, в котором мы наблюдаем за падением нефтяных капель.
- The 40 мкм фильтр элемент (used for general industrial and workshop applications) must be мытый and blown through or replaced at the latest when the pressure drop exceeds 0.5 бар. <п>.