AQUA Wheel Coating 30ml PERMANENT COATING ON RIMS

AQUA Wheel Coating 30ml PERMANENT COATING ON RIMS

Что вы ищете?

AQUA Wheel Coating 30ml PERMANENT COATING ON RIMS

В наличии
Код товара:
10051274031
2746,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Описание
AQUA Wheel Coating 30ml

Clean and tidy rims are every driver's dream. Однако, это было известно за долгое время, что в заказе на достижение такого эффекта вам нужно положить много энергии и возможностей для ухода за римами. Есть ли другое лучшее решение? Fortunately, yes!

AQUA Wheel Coating is a very durable, extremely resistant and hydrophobic coating for the protection of aluminum, chrome, varnished and отполированный римс. После того, как мы его использовали, Римы не только стали более грязными, но также не было сильного алкалина или кислотных агентов, которые должны были вымыть их.

формула покрытия AQUA Wheel была разработана таким образом, что покрытие невидимо для глаз после применения, и в то же время идеально защищает автомобиль rims. Depending on the conditions, a single application of the preparation provides Surface protection for up to 24 months, therefore it is extremely efficient product.

high hydrophobicity of AQUA Wheel Coating makes the surfaces protected with the preparation effectively reflect water particles and prevent the formation of stains. В повороте, благодаря более низкой адгезии impurities (E. G. road salt, dust или mud)очистка оправы становится намного легче, она требует меньшего эффекта и не должна быть сделана так часто, как раньше.

a great advantage of the Aqua Wheel Coating coating is also the ease of application. Это достаточно тщательно очистить и разложить защищенную поверхность дважды, применить подготовку к ней, а после нескольких минут полировать очищенную поверхность сухой тканью из микрофибры (подробные инструкции по нанесению покрытия на аква-колеса прилагаются к изделию).

путем суммировать up, AQUA Wheel Coating is:

<улей>
  • less dirty римс,
  • easier cleaning,
  • high hydrophobicity of protected surfaces,
  • sensational performance,
  • impressive durability (до 2 лет! ),
  • simple application.

    Directions for use:

    <улей>
  • Before применение the coating, thoroughly clean the protected surface and degrease it twice (you can use isopropyl alcohol)
  • The coating is best applied with straight lines directly on the surface using an applicator or a special coating cloth.
  • Wait a few minutes and polish the surface to be cleaned using a dry microfiber cloth.

    Note: AQUA Wheel Coating should not be applied in full sun, at temperatures below 10 degrees Celsius and on hot elements.

    Perfectly secured rims in your car? Из курса! Попробуйте наше удивительное Аква-колесо и посмотрите, как легко это сделать!

  • Scroll To Top