AQUA Coating 9H 30ml керамическое покрытие

AQUA Coating 9H 30ml керамическое покрытие

Что вы ищете?

AQUA Coating 9H 30ml керамическое покрытие

В наличии
Код товара:
10616999725
5940,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Описание
Coating AQUA 30 мл 9H ceramic coating

Set contains:

1 шт. AQUA Coating 9H 30ml ceramic coating

1 шт. IPA Cleaner 100ml

2 шт. Microfiber 30х30 in a randomly selected color

AQUA Coating 9H - A sensational ceramic coating for special tasks and at the same time a product created especially for professional detailers.

The composition of the preparation, as well as the use of innovative technologies in it, guarantee perfect and professional protection for each type of лак горячей сушки. Более того, это экстраординарное покрытие имеет собственноручно регенерирующие свойства и его прочность может длиться от двух до трех лет. Вам нужно надежное керамическое покрытие? Bet on the proven A QUA Coating 9H and join the group of delighted users!

AQUA Coating 9h

Perfectly fills small царапин on the car's paintwork, adds depth to the surface on which it will be applied, guarantees an extraordinary smoothness of the surface, has self-healing properties, emphasizes the color of the paintwork and provides it with a unique gloss guarantees a high degree of hydrophobicity is very durable is resistant to царапин is efficient is easy to apply, it copes well even with aggressive chemicals

The durability of AQUA Coating 9H is 24-36 months.

Directions for use:

Apply about 8 drops of AQUA Coating 9H on the dry applicator. Это достаточно, чтобы покрыть половину среднего размера тела (the already soaked applicator means that fewer drops may be needed for further application). Распространение покрытия на варниш, делая перекрестные движения. After waiting for about 30-60 seconds, remove the excess product with the first microfiber (the product crystallizes quickly, so does not wait too long). Используйте второе микроволокно, чтобы полировать поверхность, пока она не станет глянцевой. После нанесения покрытия на все части автомобиля, оставьте их в благоприятных погодных условиях в течение 24 часов. Make sure the temperature does not drop below 10 degrees. Для лучшего эффекта мы рекомендуем применять не один, а два слоя Аква-покрытия 9 часов. after applying the last layer of AQUA Coating PRO 9H, apply Coating Booster !!!

подготовить автомобиль для покрытия:

<улей>
  • clean the varnish (deironization, decontamination + Clay treatment)
  • clean the surface safely and thoroughly
  • make a mechanical paint correction
  • degrease the car body (preferably twice).
  • Important additional information:

    Remember that the applied coating dries very quickly, so large elements such as divide the mask into two parts. Берите уход за хорошим освещением при нанесении покрытия.

    Protect the surface from moisture for 24 hours after application. Покрытие должно было не вступать в контакт с непогашенными погодными условиями за первые 7 дней.

    Never use the product on a hot or damp surface.

    не применять AQUA Coating 9H in the rain или in direct sunlight.

    Don't let the temperature IT below 10 degrees. Используйте специальный Аква-аппликатор, который позволит вам применить покрытие корректно.

    Use appropriate personal protective equipment during application. Мойте машину, защищенную от покрытия руками в последнюю неделю.

    Note-important information! Грязь-это самый разрушительный фактор, когда она приходит к разрушению свежего, необузданно закаленного покрытия! кто попадает в нее. Consequently, for two weeks after application (i.E. for the period in which the coating hardening takes place), the customer should pay close attention not excessively dirty his car. И теперь самая важная вещь: если бы это было так быстро, то мыть поверхность с нейтральным агентом было бы гораздо менее вредно для покрытия, чем оставлять грязь на нем.

    Car ABC IPA CLEANER 100 мл

    Final inspection product. Благодаря его составу, он идеально подходит для разложения поверхности после коррекции Варни и до нанесения восков, быстрых деталей и керамических покрытий.

    Microfiber 30x30cm 220г / м2

    несмотря на низкий базовый вес - высокое качество универсального микроволокна для полирования пластиковых элементов и оправ, как хорошо, как для восков, lapping polishing pastes and coatings, а также для небольших дополнительных быстрых деталей.

    Scroll To Top