A7D1220 - Конвертер 48/60 / 72v (40-90V) к 12V 20A шаг для
The store will not work correctly in the case when cookies are disabled.
A7D1220 - Конвертер 48/60 / 72v (40-90V) к 12V 20A шаг для
Основные параметры
Дополнительная информация
| Состояние |
Новый |
| Номер детали |
A7D1220 |
| Номера заменяемых деталей |
1200146-01, A7D1220, |
| Оригинальный номер детали |
A7D1220, 1200146-01, |
Описание
Reliable step down converter from 48/60/72 / 90V to 12V 20A 240W
input voltage range for correct and stable operation is 40-90V , energy efficiency 95%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
solid терминал ввода / вывода

- модель : A7D1220
- Converter type : DC / DC
- Voltage change : Step down
- типичное входное напряжение [V] : 48/60/72
- минимальное входное напряжение [V] : 40
- Maximum input voltage [V] : 90
- Output voltage [V] : 12
- Ripple of the output voltage [MV pp] : 120
- Accuracy of the output voltage [%] : 1.5
- Maximum output current [a] : 20
- рекомендуемый минимум текущего потребления [a] : 0.5
- максимальная мощность нагрузки [Вт] : 240
- рекомендуемая минимальная мощность нагрузки [Вт] : 6
- Maximum energy efficiency [%] : 95
- Idle current max. [a]: 0.1
- line regulation [%] : 0.2
- load regulation [%] : 0.2
- температура coefficient [% / ° C] : 0.03
- Минимальная рабочая температура [° C] : -20
- максимальная рабочая температура [° C] : 60
- рабочая частота [кГц] : 100
- Overload / short-circuit protection for output : Overload shutdown of the инвертор
- Thermal protection : Ограниченный the output current after exceeding the max. operating temperature until it cools down
- Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
- Protection when the voltage exceeds max.Inputs : Output circuit protection
- Connection : Screw terminals on the connector
- класс Tightness : IP68
- Length [mm] : 100
- Width [mm] : 113
- Thickness [mm] : 35
- Housing construction : Aluminum profile, продольно ribbed
- Sealing : epoxy resin
- Cooling : Passive / the case acts as a heat sink
- Protection of the voltage source in case of инвертор failure : Fuse in the инвертор housing
- вес [g] : 700
- Primary and secondary Side insulation: No-common ground