871 000 - KME FENIX 6 CYL SINGLE GAS INJECTORS

KME FENIX single injectors set for 6 cylinders.

the advantage of FENIX injectors is their speed and short stable opening times. Они также characterized by high Gas flow stability and precise dosing under dynamic conditions. This is especially true for

systems with direct Fuel injection due to their dynamics of operation. В заказе ensure high quality of the injector, KME, as a manufacturer of comprehensive Autogas solutions, implemented appropriate parameter control mechanisms and at the same time took care of the selection of appropriate materials. The product contains seals made of fluorinated rubber (FKM) compounds and modern fluoropolymer раздвижные coatings (non-stick and anti-freeze), which make it extremely resistant to fuel contamination and low temperatures.

The injector is equipped with a standard 2-pin Superseal connector.

Technical data:

- макс. flow rate at 1.0 Bar pressure: 120 НЛ / мин

- макс. мощность: 60 ÷ 65 л. с. | л. с.

- мин. stable opening time: 1.55 ms

- макс. диаметр насадки: 3.0 мм

- сопротивление катушки: 1.9? ± 5%

- задержка открытия: 1.7 ms

- задержка закрытия: 1.2 ms

- макс. opening current: 6A

- макс. holding current: 2a

- макс. рабочее давление: 4.5 Bar

- рабочая температура: -20 ℉ + 120 ° C

- напряжение питания: 12 ÷ 16v

- Service life: & gt; 500 million cycles

- Superseal

- Coating: Фторполимер

- Connectors for 6mm wires

The composition of the set:

- 6X инжектор

- 6X 1.75 мм инжектор калибровки сопла

- 6X Suction manifold connection