H7 LED motorcycle headlight bulb
Einparts EPLH33 6000K флип чип США 12 / 24V
уникальная система рассеивания тепла:
тепло рассеялось к задней части лампы, не похожей на дешевые светодиоды через переднюю часть диода, которые перегревают entire lamp
in the rear part A heat dissipation fan
FLIP CHIP LED is placed on a термально conductive материал, with a metal connection
the heat is carried away to the rear, where the fan is mounted
FLIP CHIP LEDS are 20% stronger than ordinary LEDs:
ordinary LEDs have a metal chip contact that obscures 20% of the emitted light
in FLIP CHIP, contact with led chips, ensure wire connection
улей>
Flip Chip LEDs not Dazzle the drivers opposite!
LEDs are placed at the same height as the filament in a halogen bulb
Thanks to this, FLIP CHIP LEDs have a CUT-OFF, which prevents glare
Benefits:
Long service life (до 60,000 operating hours)
Lighting of the entire surface, instead of point sources characteristic of ordinary and POWER LEDs
small size-can be mounted in FIAT PUNTO II , where most LED bulbs are too large
built-in Cheat system CNABUS-OPEL INSIGNIA does not display burnt bulb error
high efficiency-at an intensity of 2.3 A and a voltage of 14.4 V, The bulb obtains over 5000lm
small structure, narrow shaft, no EXTERNAL COMPONENTS (module / driver)
it is much легче установить bulbs than other LEDs
Technical specifications:
Type: H4
Color: 6000K (COOL WHITE)
LED тип: флип чип
яркость: 5000lm / bulb
Мощность: 34W
рабочее напряжение: 9V-32V
рабочая температура: -40 ° C до + 50 ° C
Canbus: Yes
Removable base: Yes
цель: Offroad
LED bulbs not only improve the effectiveness of road lighting, but also improve the appearance of the motorcycle:
Real photos of led bulbs installed by us:
Viber
Telegram
