ВЫБИТЫЙ FLAT BUMPER COVER

SUZUKI IGNIS II год : 2003-2008 размеры: 108 см (length) х 8.2 см (width measured in the middle of the length) Материал: нержавеющая сталь отделка: матовая сталь

модель: 39-2102

Producer: Alu-Frost

< / div > < div class="text" >

DESIGNATION OF bodywork VERSIONS:

<улей>

3D - купе body

4D - седан body

5D - хэтчбек body

the lack of markings in a given auction means that the cover fits all Body versions.

The embossed bumper cover is the latest ALU-Frost offer.

The bumper protects The paintwork on the entire surface of the rear bumper during loading and unloading

когда он загружается, тяжелый Люггер размещается на окрашенном заднем бампере, который заставляет его царапаться. effective solution is the use of a pressed overlay on the bumper made of stainless steel.

DIMENSIONS AND THE ACTUAL SHAPE OF THE OVERLAY SHOWS BELOW ДИЗАЙН:

Overlay матовый made of stainless steel. Это была двусторонняя, очень сильная клейкая лента.

The covers are perfectly matched to a specific car model. устойчивость к разной погоде и дорожным условиям-влаге, песку, соли. Они являются оригинальными и элегантными дополнениями к любой машине.

Application and features of the rear bumper protective cover: <улей>

paint protection against mechanical damage and царапин resulting from loading / unloading luggage,

protection against weather conditions,

gives the car an exclusive character,

очень легко собрать.

INSTALLATION INSTRUCTIONS:

1. Clean and degrease the surface
2. Unpack The overlay, don't remove the foil from the double-sided tape yet
3. Try on exactly where you want the overlay to be
4. Peel off The foil securing the double-sided tape
5. Attach the overlay by pressing крепко
6. готов!

* the manual uses an overlay from a different product series

Attention!

the action of the adhesive tape is immediate. the optimal temperature for sticking is 15 ° C-30 ° C

* the PICTURES SHOWN are PREVIEWABLE PHOTOS - the cover is fitted to the car's bumper at the beginning of the offer description.