2/45034 - МОЛДИНГ НАКЛАДКА НА БАМПЕР OPEL MOKKA

2/45034 - МОЛДИНГ НАКЛАДКА НА БАМПЕР OPEL MOKKA

Что вы ищете?

Поиск
Расширенный поиск
Переключить навигацию
Меню
Настройки
Язык
Ru
Валюта
грн
Аккаунт
Моя тележка 0
Подобрать по VIN коду
UA
ПН-ПТ: 8:00 - 19:00
СБ-ВС: 9:00 - 16:00

2/45034 - МОЛДИНГ НАКЛАДКА НА БАМПЕР OPEL MOKKA

В наличии
Код товара:
11982001251
3461,00 ₴
Добавить в список желаний Добавить к сравнению
main product photo
+38 (095) 900-37-17
+38 (067) 900-37-17
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 2/45034
Описание

BLACK BUMPER COVER WITH a BEND OPEL MOKKA Винтаж: 2012-fl2016

модель: 2/45034

Producer: Avisa

The avisa Rear bumper protector is the perfect solution for your car, because it has both a protective function and looks great as a decorative item. Установленная полоса устойчива к погодным условиям (температура -40 ° C / + 50 ° C) и посещает автомойку (влажность).

The standard in the strip is also the protection of the bumper edge through a specially profiled bend for this purpose.

All photos of the overlay presented at the auction are real photos, were made on the car for which the overlay was designed.
Overlay made of black / graphite stainless steel. Это была двусторонняя, очень сильная клейкая лента.

The covers are perfectly matched to a specific car model. устойчивость к разной погоде и дорожным условиям-влаге, песку, соли. Они являются оригинальными и элегантными дополнениями к любой машине.

Application and features of the rear bumper protective cover: <улей>
  • paint protection against mechanical damage and царапин resulting from loading / unloading luggage,
  • protection against weather conditions,
  • gives the car an exclusive character,
  • очень легко собрать. < / div >

    The overlay is attached with double-sided tape, which is located on all four edges of the slat. Attention!

    Attach the product carefully, as it will not be possible to improve the assembly once it has attached.

    After installing the cover, you can load and remove your luggage with confidence, and the scratched item is now covered with an exclusive accessory.

    You will receive the overlay in a sturdy package with step-by-step assembly instructions and a 3M обсаливая wipe.

    Installation instructions:
    1. Clean and degrease the surface with the 3M wipe provided
    2. Unpack The overlay and see the attached manual
    3. Without removing the tape securing, try on and carefully mark the place of gluing in order to properly adjust it to the избранный place of installation
    4. Peel off The foil securing the double-sided tape
    5. применить полосу к previously marked place, starting from the top edge
    6. Press The strip down carefully over the entire surface
    7. Ready
    Attention!

    the action of the adhesive tape is immediate. The optimum temperature for sticking is 10 ° C-30 ° C

    * the manual uses an overlay from a different Product series

    • Scroll To Top