Джек C-328 C-330

Production:

Original Hylmet польский продукт, символ: 1.40.15.031, 30/42 / 37-129 / 2 / в, 43 / 37-129 / 2, PZ2-18at,

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

The pump primarily intended to control the hydraulic system in Ursus C-328 and C-330. Recommended when the original pump does not work because the TUR runs too slowly.

Общая информация:

The pump has an enhanced Oil flow, the same pressure as in the original. It does not require adjustment of the safety valve in the distributor under the seat.

технические данные:

<улей>

емкость: 28 л / мин (при 1600 об. / мин.)

геометрический объем: 18 см3 / rev

Direction of rotation: left

диапазон скорости: 800-2500 (об / мин)

Internal threads: M22x1.5

Body: cast iron

Work parameters:

Keeping the pump operating in accordance with its nominal parameters ensures The longest service life. Операция по максимальным параметрам разрешима, но она сократит жизнь насоса. <улей>

Номинальное давление: 10mpa

максимальное давление: 12mpa