1.37.10.036.4 - HYDRAULIC MOTOR HYDROMOTOR 1125 6.9 kW 72Nm

1.37.10.036.4 - HYDRAULIC MOTOR HYDROMOTOR 1125 6.9 kW 72Nm

Что вы ищете?

1.37.10.036.4 - HYDRAULIC MOTOR HYDROMOTOR 1125 6.9 kW 72Nm

В наличии
Код товара:
10801040911
7663,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 1.37.10.036.4
Описание
here'S WHAT MAKE THE HYDROLIDER DIFFERENT ENGINES:

1. Large stabilizing bearing with support

<улей>
  • large support bearing instead of two small bearings
  • защищает the roller against lateral stresses
  • prevents oil leaks at the roller
  • 2. Check valves

    <улей>
  • significantly extend the life of the engine
  • improve the effectiveness of the сальник on the roller
  • they protect the engine at work in unfavorable conditions
  • BMR 36 HYDRAULIC MOTOR AS A SET WITH A MOUNTING PLATE AND A SLEEVE

    TYPE: усиленный ГЕРОЛЛЕР

    ролик: 25 мм < /h2 > об / мин макс .: 1125 об. / мин.

    Production:

    Original Hydrolider brand product, символ: 1.37.10.036.4

    Application:

    it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

    The BMR 36 hydraulic motor is intended primarily for operation in various types of agricultural and industrial equipment. В системах, где есть средняя мощность и при наличии среднего нефтяного потока, мы хотим добиться очень высокой вращательной скорости.

    Recommended use:

    <улей>
  • Wrappers, forage harvesters, spreaders
  • Sweepers, Sand spreaders, Snow blowers
  • Морковь, beet, onion and other cutters
  • Leaf and branch scrapers
  • Conveyor drives
  • Chippers and shredders of branches
  • Ford winches and vehicle winches
  • Orchard and soil drilling rigs
  • Characteristics and advantages of Hydrolider BMR engines:

    <улей>
  • roller bearings (рис.R) instead of plastic inserts
  • can be connected in series and in parallel
  • high starting torque and smooth operation right after start-up
  • высокое сопротивление осевым и радиальным силам
  • simple installation
  • низкий уровень шума
  • long service life even in harsh conditions of use
  • the design of BMR motors is based on theGEROLLER system consisting in the use of reinforced roller bearings inside. The rollers ensure the highest overload resistance and long Engine life. Roller motors recommended for systems that work in Hard conditions, with long, uninterrupted work in agriculture and industry.

    ATTENTION! the cheapest motors on the market are notGEROLLER , they don't have roller bearings, but only rigid bushings.

    Technical data:

    <улей>
  • Direction of rotation: both sides
  • Internal threads in the body: 1/2 "
  • Ports: Side connection
  • Материал корпуса: литое железо
  • Maximum parameters in continuous operation:

    <улей>
  • максимальный поток: 40 л / мин
  • Максимальная скорость вращения: 1125 об. / мин.
  • максимальное давление: 14 МПа (140 бар)
  • максимальная мощность: 6.9 kW
  • максимальный крутящий момент: 7.2 daNm (72 Нм)
  • Maximum parameters in temporary operation max 6 seconds every minute:

    <улей>
  • максимальный поток: 50 л / мин
  • Максимальная скорость вращения: 1400 об. / мин.
  • максимальное давление: 17.5 MPa (175 бар)
  • максимальная мощность: 7.9 kW
  • максимальный крутящий момент: 9.4 daNm (94 Нм)
  • Oil types recommended by AGRICOLA:

    <улей>
  • Rare high-quality oil: Lotus AGROL BOXOL 26
  • Medium-thick high-quality oil: AGRO OIL L-HL 32
  • Thick high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
  • рекомендуемый диапазон температуры масла:

    <улей>
  • Permissible ambient temperature: -40 C до +80 C
  • Permissible Oil temperature: -15 C до +80 C
  • THE ENTIRE SERIES OF BMR ENGINES AVAILABLE ON OTHER AUCTIONS - BELOW THE PARAMETER TABLE FOR ALL ENGINES FROM THIS SERIES

    Віртуальна АТС
    Віртуальна АТС
    Хочете, зателефонуємо
    Вам за 30 секунд?
    КНОПКА
    ЗВ'ЯЗКУ