1-SECTION HYDRAULIC DISTRIBUTOR 40л / мин
WITH ALTERNATIVE CONTROL
INCLUDED WITH 1.5 M CABLE AND BODY WITH LEVER
Production:
дистрибьютор: Badestnost, символ: 1.10.34.010
Line : Hydrolider, символ: 1.20.00.012.1
Body with lever: Indemar, символ: 1.15.00.020
улей>
Application:
The set is adapted to various types of machines, such as: agricultural, orchard, forestry, construction, industrial machines, tractors, sprayers, rounds, циклоп, HDS loaders, loaders, excavators, sweepers and other hydraulically controlled devices.
это используется для обеспечения безопасности, лучшего контроля комфорта и необходимости очистки, это необходимо установить распределитель вне кабины. Only the control unit (in this case the cable and the body with the lever) remains in the cabin.
A lever located directly next to the manifold provides alternative control of the hydraulic system. Это решение дает контроль над тем же распределителем из двух разных мест на машине.
HYDRAULIC DISTRIBUTOR
технические данные:
Recommended Oil flow in the system: 0-40 л / мин
максимальное входное давление: 250 бар
максимальное давление возврата: 50 бар
Maximum pressure in sections: 300 bar
overflow valve is factory set - 180 bar ± 30 bar. Это рекомендовано, чтобы давление было проверено и отрегулировано перед комиссией. Self-adjusting, full rotation 30 Bar change.Ли>
Possibility of independent regulation, full turn of the valve is changed by 30 bar
улей>
Connection:
Internal threads in the body: Power supply: 1/2"; return: 1/2"; sections: 3/8 "
Internal thread of the tube for the rope: M16x1.5
Internal thread at the end of the slider: M6x1.5
улей>
Oil type and temperature:
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 C
rarer high-quality oil: Lotus AGROL BOXOL 26
a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46


Control and principle of operation:
Exemplary control: a one-sided or double-sided цилиндр as well as a hydraulic motor in both directions.Ли>
3-position slider (1 - 0 - 2), on a spring, i. e. IT returns to the neutral position by itself after releasing the lever.Ли>
In the neutral position, the oil flows freely into the return line, the pump is unloaded.Ли>
Possibility of serial connection to the existing system (pressure sleeve required).Ли>
BODY WITH LEVER AND ROPE
Technical data:
Материал корпуса: plastic
материал brackets fixing to the base: galvanized steel
Distributor Slide control: in both directions
возможность подключения в серии с другими, теми же телами
общая толщина тела: 49 мм
Длина кабеля управления: 1500 мм
Outer thread of the outer casing end: M16x1. 5
Cable end external thread: M6x1