1.10.10.017 - HYDRAULIC DISTRIBUTOR WITH SPLITTER ACCELERATOR

1.10.10.017 - HYDRAULIC DISTRIBUTOR WITH SPLITTER ACCELERATOR

Что вы ищете?

1.10.10.017 - HYDRAULIC DISTRIBUTOR WITH SPLITTER ACCELERATOR

В наличии
Код товара:
10655150749
6118,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 1.10.10.017
Описание
1-SECTION HYDRAULIC DISTRIBUTOR P81 WITH ORIGINAL ACCELERATOR FOR the SPLITTER

Production:

Original product of the Badestnost Болгария brand, manufacturer's символ: P81 RS G12; символ: 1.10.10.017

Application:

Specially designed for Wood splitters. А весной на ползунке в одной стороне, а в другой-латч с отскоком. During splitting, for safety reasons, the splitter requires holding the lever, while the return of the piston rod is on the latch, which pops back when the cylinder is fully retracted and returns to the starting position.

это решение позволяет вам изменить багажник и очистить корпус, чтобы вернуть поршень. В добавлении, после возвращения поршневого стержня, защелка выскакивает из-под себя и освобождает насос, спасибо, что гидравлическая система не нагревается. В нейтральном положении нефтяные потоки медленно проходят через распределитель и направляются к возвращению канала в танк.

The distributor is additionally equipped with an accelerator that increases the speed of extension of the piston rod. Контроль между ускоренным режимом и режимом питания ручной. Это рекомендовано установить ускоренный режим, когда поршневой стержень расширяется и идет по его пути к стволу, когда после того, как он достигает ствола, он рекомендован к переключению на режим питания, поршневой стержень затем медленно опускается, но при этом давление требуется разделить багажник.

The splitter with accelerator is an ideal solution when the system has an electric or combustion engine with too little power and in order to maintain high pressure in the system, necessary for the proper operation of the splitter, we are forced to install a pump with a low oil capacity.

технические данные:

Recommended Oil flow in the system: 0-80 л / мин.

Example of control: 2-way actuator.

Control:

Four-position lever (1 - 0 - 2 - 3):

<улей>
  • Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.
  • Working position 1 (lever set diagonally backwards), The Actuator piston rod retracts.
  • Working position 2 (lever in the inclined position forward), the actuator piston rod extends in standard mode (power mode). <улей>
  • Working position 3 (lever set in the diagonal position maximally forward), the actuator s piston rod extends in accelerated mode.

    On the right, the hydraulic diagram of the distributor:

  • Connection:

    <улей>
  • Pump feed( P): 3/4 " BSP Female thread
  • Return to tank( T): BSP 3/4 " Female thread
  • Sections (A, B): BSP 1/2 " Female thread
  • диапазон давления:

    <улей>
  • Maximum pressure on the supply: 250bar
  • Maximum pressure on the return: 50Bar
  • Maximum pressure on sections: 300bar
  • overflow valve is factory set at 180bar ± 30 Bar.

    it is recommended to check and set the appropriate pressure before starting, the possibility of self-regulation, full turn change by 30Bar.

    Valve that releases The lever from working to neutral position, set at 70 bar, can be independently adjusted in the range of 70 - 140 bar.

    Oil types recommended by AGRICOLA:

    <улей>
  • rarer high-quality oil: Lotus AGROL BOXOL 26
  • a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
  • рекомендуемый диапазон температуры масла:

    <улей>
  • Permissible ambient temperature: -40 C до +60 C
  • Permissible Oil temperature: -15 C до +80 C