1.10.10.011 - 1-SECTION HYDRAULIC DISTRIBUTOR 80L + LATCH

1.10.10.011 - 1-SECTION HYDRAULIC DISTRIBUTOR 80L + LATCH

Что вы ищете?

1.10.10.011 - 1-SECTION HYDRAULIC DISTRIBUTOR 80L + LATCH

В наличии
Код товара:
10483960019
5569,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 1.10.10.011
Описание
P80 HYDRAULIC 1-SECTION DISTRIBUTOR WITH a LATCH SECTION

Production:

Original product of the Badestnost Болгария brand, manufacturer's symbols:

  1. With a latch for the P80 A8 gkz1 actuator
  2. With a latch for the P80 D8 gkz1 engine

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.

Спасибо за рычаг с фиксатором, распределитель идеально подходит для управления гидравлическим двигателем. Вы можете запустить двигатель и уйти от манифолда без необходимости держать рычаг.

технические данные:

Recommended Oil flow in the system: 0-80 л / мин. Example of control: A hydraulic motor in both directions or a double-acting actuator.

Possibility of serial connection to the existing system (pressure sleeve required).

Control

Three-position lever (1 - 0 - 2), with a latch.e. it holds the position by itself in the working position:

<улей>
  • Neutral 0 position (lever in vertical position) the engine or actuator is stationary - масло идет к переполнению.
  • Working position 1 (lever set diagonally forward), the engine turns to the left or the actuator s piston rod extends.
  • Working position 2 (lever set in oblique position to the rear), the engine turns clockwise or the Actuator ' s piston rod retracts.

    On the right, hydraulic diagrams of distributors, подряд from the left: to control the actuator and to control the engine:

  • Connection:

    <улей>
  • Pump feed( P): BSP 1/2 " internal thread
  • Return to tank( T): BSP 3/4 " Female thread
  • выход в разделы (A, B): BSP 1/2 " Female thread
  • Series connection (N): BSP 3/4 " Female thread
  • диапазон давления:

    <улей>
  • Maximum pressure on the supply: 250bar
  • Maximum pressure on the return: 50Bar
  • Maximum pressure on sections: 300bar
  • overflow valve is factory set at 180bar ± 30 Bar.

    It is recommended to check and set the correct pressure before start-up. Possibility of independent regulation, Full turn change by 30Bar.

    Oil types recommended by AGRICOLA:

    <улей>
  • rarer high-quality oil: Lotus AGROL BOXOL 26
  • a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
  • рекомендуемый диапазон температуры масла:

    <улей>
  • Permissible ambient temperature: -40 C до +60 C
  • Permissible Oil temperature: -15 C до +80 C