INCLUDED WITH COLUMN AND CONNECTIONS

Production:

Original product of the Hydrolider brand, orbitrol символ: 1.06.00.125, kit символ: 1.06.10.134

third-party comparative numbers:

OSPC-125-ON; OSPC125ON; 150n2152

Application:

It is widely used in steering systems in industrial machinery and vehicles used in transport, agriculture, horticulture, forestry, construction and industry.

Orbitrol OSPC 125 ON is intended for the hydraulic control of the steering system in agricultural tractors, forklifts, excavators, combines and construction machines и т. д.

< / div >

дорогой клиент, READ this BEFORE you BUY ORBITROL:

Orbitrol is a very precise and important device for traffic safety, unfortunately there are many cheap goods from China on the market, which at first glance looks the same, but the неточно workmanship makes it impossible to drive and work with the tractor properly. Мы не рекомендуем покупать новые орбитальные аппараты, из ненадежных источников, из продавцов, которые не могут продать этот тип оборудования.

Technical data of the orbitrol:

Orbitrol 125 with the система (OPEN NORMALLY), while the steering wheel is stationary, the oil постоянно circulates in the system and freely passes through the orbitrol, the return line to the tank, the pump then works, but is unloaded. <улей>

Connections: P, T, A, B internal threads [BSP]: 1/2 "

фиксация рулевой колонки: 4X M10 screw - 16mm

valves setting: overflow 160bar, shock 240bar

геометрический объем: 125cm3 / rev.

Recommended Oil flow in the system: от 10 до 14л / мин.

материал: литое железо

Technical data of the roller:

<улей>

Number of cutters on the tip from the orbitrol side: 12

The width of the milled tip: 20.10 mm

общая длина вала: 80 мм

гладкая ширина наконечника: 24.85 мм

full size drawing (рис. ):

Advantages of Hydrolider production orbitrols:

<улей>

A special reinforced and more precisely made structure обеспечивает perfect operation without leaks, without jerking the steering wheel and, most importantly, very light and smooth steering even in heavily loaded vehicles.

each orbitrol is sent together with the instructions for connecting the hydraulic lines, we also provide full technical support in selecting the appropriate orbitrol and during assembly.

Produced in Europe, comes from a reliable source, has a two-year warranty, proven goods from a reliable manufacturer.

Even when the tractor or pump fails, this function is very useful in emergency situations, e.g. when towing.

Hydraulic diagram of the OSPC ON orbitrol (рис. ):

General technical data of the steering column:

Very solid steering column, double bearing, galvanized.

the product from a professional production line has a two-year warranty.

the upper part of the column, The shaft with a cone fits the original steering wheel from the above mentioned. Тракторные модели.

the lower part of the column, a typical milled shaft (12 cutters), a typical and standardized disk.